ZR-1 Net Registry Forums - FX3 VS RideTech Coilover System

Page 2 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - FX3 VS RideTech Coilover System (http://zr1.net/forum/showthread.php?t=31944)

-=Jeff=-

07-09-2020 12:53 PM

Re: FX3 VS RideTech Coilover System

They should be 10" or maybe 12" Hyperco coils.. I run 10" on my car 425/275. Mine are Hyperco 10" length 2.5" coil ID

EvanZR1

07-09-2020 01:29 PM

Re: FX3 VS RideTech Coilover System

Quote:

Originally Posted by -=Jeff=- (Post 311293)

They should be 10" or maybe 12" Hyperco coils.. I run 10" on my car 425/275. Mine are Hyperco 10" length 2.5" coil ID

Sweet, Amazon has them in all the different rates. Will make ordering easy.

Karl	07-10-2020 12:44 AM

Re: FX3 VS RideTech Coilover System

Another good source

https://www.speedwaymotors.com/shop/...ories~6-16-306

rkreigh

07-30-2020 01:22 PM

Re: FX3 VS RideTech Coilover System

some new custom adjustable (fixed not fx3) setup is available from Demps and looks sweet. If you would like a drm with 425 and 275 rates will be available FX3 with working actuators

the fx3 is nice but the fx3 shocks are getting long in the tooth and hard to service. My shocks are off a low mile ZR1 and really nice

All times are GMT -4. The time now is 12:37 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page