ZR-1 Net Registry Forums - are there two different trans in zr-1's

Page 2 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - are there two different trans in zr-1's (http://zr1.net/forum/showthread.php?t=2875)

Jeffvette

03-03-2007 03:52 AM

Re: are there two different trans in zr-1's

Quote:

Originally Posted by zr-1assassin

$1240.00-JUST TO PUT IT IN! does someone know what this SHOULD cost to have the clutch installed. no flywheel-just ACDELCO clutch kit i have? thanks guys

Should be 6 hours maybe 7 at most. It is rather time consuming.

Undo shift knob and other interior trim
Remove exhaust
Remove driveline
Remove C-beam
Remove trans
Remove clutch slave
Remove bellhousing
Remove pressure plate and clutch disk
Prep and clean surfaces
And install.

Jeffvette

03-03-2007 03:54 AM

Re: are there two different trans in zr-1's

Quote:

Originally Posted by Aurora40

No, that never happened. There were earlier Corvettes that had a 4-speed with a 2-speed overdrive, but not by the time the ZR-1 was on the scene.

4+3
4 speed with 3 gear OD. :thumbsup:

Aurora40

03-03-2007 02:49 PM

Re: are there two different trans in zr-1's

Quote:

Originally Posted by Jeffvette

4+3
4 speed with 3 gear OD. :thumbsup:

Right, well the OD was a 2-speed overdrive, as in it had two ratios. It resulted in 3 extra overall gear ratios though (as it wasn't used on 1st gear). :cheers:

All times are GMT -4. The time now is 08:08 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page