ZR-1 Net Registry Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   new owner 1990 zr1 (http://zr1.net/forum/showthread.php?t=21418)

rikker 10-16-2013 08:10 PM
Re: new owner 1990 zr1
 
ITS OUT AND REALLY DIRTY, ANYONE KNOW IS THE WATERPUMP SOMETHING I SHOULD DO WHILE IM IN THIS MESS.

Kevin 10-16-2013 08:22 PM
Re: new owner 1990 zr1
 
only if it's leaking.

Schrade 10-16-2013 08:40 PM
Re: new owner 1990 zr1
 
Welcome onto the boards there...

PhillipsLT5 10-16-2013 09:58 PM
Re: new owner 1990 zr1
 
Keep cleaning until you can see some good light from behind or better yet, get a new & or alum rad, why put a old rad back in, just asking for another rad pull soon

rikker 10-17-2013 06:49 AM
Re: new owner 1990 zr1
 
I was thinking same thing,sometime I go over board and replace things that don't need it, rad is in great shape though ,but gonna go new along with the hose kit from marc and possible wpump.

bradley 10-17-2013 12:54 PM
Re: new owner 1990 zr1
 
if you do the water pump be very carefull. as the bolts MUST go back into the hole they came out of.

rikker 10-17-2013 01:18 PM
Re: new owner 1990 zr1
 
Hi trying to find out info on this procedere, have you done one and how difficult is it?

Dynomite 10-18-2013 07:27 AM
Water Pump Installation
 
I use a very thin coat of Permatex 300 Form A Gasket on each side of the Water Pump gasket and IH coolant manifold gaskets (unless you have eliminated TB coolant) before installing. I use a drop of Blue Loctite 242 on all water pump bolts and torque all water pump bolts 18 ft-lbs. NO LEAKS

http://i287.photobucket.com/albums/l...a6c00b8a76.jpg

http://i287.photobucket.com/albums/l...psaf26fa81.jpghttp://i287.photobucket.com/albums/l...%20ZR1/242.jpg

Now if you get confused on which bolts go where......just insert the bolt and if it sticks out about 3/8 inch to 1/2 inch you have the correct position for that bolt :p

WARP TEN 10-18-2013 10:36 AM
Re: Water Pump Installation
 
Quote:
Originally Posted by Dynomite (Post 185622)
I use a very thin coat of Permatex 300 Form A Gasket on each side of the Water Pump gasket and IH coolant manifold gaskets (unless you have eliminated TB coolant) before installing. I use a drop of Blue Loctite 242 on all water pump bolts and torque all water pump bolts 18 ft-lbs. NO LEAKS

http://i287.photobucket.com/albums/l...a6c00b8a76.jpg

http://i287.photobucket.com/albums/l...psaf26fa81.jpghttp://i287.photobucket.com/albums/l...%20ZR1/242.jpg

Now if you get confused on which bolts go where......just insert the bolt and if it sticks out about 3/8 inch to 1/2 inch you have the correct position for that bolt :p
Didn't someone just post in another thread that the bolt sizes noted in the FSM are indicated incorrectly? --Bob

GOLDCYLON 10-18-2013 10:43 AM
Re: new owner 1990 zr1
 
Did you pickup a new radiator?


All times are GMT -4. The time now is 08:07 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025