ZR-1 Net Registry Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   FX3 shock actuators (http://zr1.net/forum/showthread.php?t=15508)

secondchance 08-28-2011 05:13 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by Jagdpanzer (Post 122061)
If they are doing actuator rebuilds seems they would also have replacement planetary gears. Wouldn't hurt to give them a call.
Could be. I thought I would buy a used one and send old one and have it rebuilt and keep as a spare.

XfireZ51 08-28-2011 06:15 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by secondchance (Post 122067)
Could be. I thought I would buy a used one and send old one and have it rebuilt and keep as a spare.
Yun,

Thx for the inquiry. I'd like to see if I can sell them as a set first but I'll keep u in mind.

secondchance 08-28-2011 06:26 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by XfireZ51 (Post 122069)
Yun,

Thx for the inquiry. I'd like to see if I can sell them as a set first but I'll keep u in mind.
Thanks.

GOLDCYLON 08-29-2011 08:12 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by secondchance (Post 122028)
Are they the same between the early years and later?
Also, any difference between the front and rear except for the wire length?
from 89-95 they are the same. No difference from front to rear except the wire length as noted. Short for the rear and long for the front. GC

secondchance 08-29-2011 08:34 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by GOLDCYLON (Post 122169)
from 89-95 they are the same. No difference from front to rear except the wire length as noted. Short for the rear and long for the front. GC
Thanks for the confirmation.

Fully Vetted 09-07-2014 09:06 AM
Re: FX3 shock actuators
 
Is there any need to rebuild these if they are working correctly and the gears are all intact? $125 each is pretty salty if it's not needed.

GOLDCYLON 09-07-2014 12:31 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by Fully Vetted (Post 211665)
Is there any need to rebuild these if they are working correctly and the gears are all intact? $125 each is pretty salty if it's not needed.
No. Don't fix em unless they break

USAZR1 09-07-2014 02:29 PM
Re: FX3 shock actuators
 
Quote:
Originally Posted by Fully Vetted (Post 211665)
Is there any need to rebuild these if they are working correctly and the gears are all intact? $125 each is pretty salty if it's not needed.
This place is considerably cheaper and does great work,David.
Texas Track Works
3333 Suffolk Drive Suite 202
Fort Worth, TX 76133
817.926.8863
sales@texastrackworks.com

Fully Vetted 09-08-2014 07:55 AM
Re: FX3 shock actuators
 
Sounds good. Thanks, guys...

564crewdog 11-06-2014 03:20 PM
Re: FX3 shock actuators
 
FYSA…I spoke with the folks at Texas Track Works and unfortunately they informed me that they do not rebuild the FX3 actuators:(


All times are GMT -4. The time now is 06:48 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025