Re: Door Lock Actuators
If necessary replace the battery and turn the PKE off by holding the door button for over two seconds or until you hear the locks cycle as a confirmation that the command was received.
If the battery is at 3.0 volts or more it's okay. The door switch should not have a hair trigger. The switch should be adjusted so that the door moves back about 1/16" before turning on the interior lights. If the pin at the tip of the switch needs to extend out more, pull the pin out and shim it with washers. |
Re: Door Lock Actuators
Quote:
Oh! I wonder if this is why my PKE system seems to be going a little looney. With the doors open or shut and the key in the ignition the locks randomly and continuously unlock themselves even if already unlocked. This seven-year-old nugget of info may have steered me into a good direction to investigate. :cheers: This URL may also be helpful for anyone needing PKE commands. https://www.motortrend.com/how-to/ve...repair-part-1/ |
Re: Door Lock Actuators
Quote:
|
All times are GMT -4. The time now is 07:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020