Re: TB removal and then some!!!
 

Carter, everything was in there, thanks again....

Sent from my SM-G935P using ZR-1 Net Registry mobile app

Re: TB removal and then some!!!
 

Took the valves out of the coolant pipes to do a final paint coat and then clear them. Had one minor correction with the paint to be made, so I re sprayed them both, they came out good. Getting ready for the clear...
Also some valve info if anyone has an interest...
And made some minor clear passes on the plenum as I had one imperfection that really bothered me. You would be hard pressed to find it now...:)

final paint coat...
http://i127.photobucket.com/albums/p...619_104904.jpg
bleeder valve removed...uses a 1/2" wrench to install and a 5/8" wrench to open and close the bleeder....and some rags when bleeding the system...
http://i127.photobucket.com/albums/p...619_100932.jpg
http://i127.photobucket.com/albums/p...619_101143.jpg

back to the open paint booth for more clear...

Re: TB removal and then some!!!
 

Nice work!

I might have missed it in the thread but where did get the valves and who makes them? They look to be nicer than most.
H

Re: TB removal and then some!!!
 

Thanks.....:)

Purchased from zoro.com they are $22 and change each. very well made...
http://i127.photobucket.com/albums/p...619_102759.jpg
http://i127.photobucket.com/albums/p...619_102808.jpg
clear is done....2 to 4 coats, depending on how you count them....lol
http://i127.photobucket.com/albums/p...effb3018c3.jpg
http://i127.photobucket.com/albums/p...f4d2236c4a.jpg

will let them dry for a few hours before reinstalling the bleeder valves with sealer.....getting there!!!

Re: TB removal and then some!!!
 

Looks great!:dancing

Re: TB removal and then some!!!
 

Thank you Carter, and a good part of that "Looks great!" came from the work you completed.....:D:icon_thum:icon_thum

Re: TB removal and then some!!!
 

I now have some options with the bolts from seeing them on another member's LT5. I now have both the SS replacement bolts, which I can use or the 12pt ARP bolts shown.....
Let's see, I cam mix and match, or do one side one way and the other another way!!! Either way all of them whichever one, will dress up the engine, at least the top half of the engine this season.....lol:-D

http://i127.photobucket.com/albums/p...2b6f75a6b3.jpg

Re: TB removal and then some!!!
 

Hi looking good you won't be far from getting it going
Regards Glen Collins

Sent from my SM-G930F using ZR-1 Net Registry mobile app

Re: TB removal and then some!!!
 

Thanks Glen, still have to work on the TB. Going to try to get that done this week. Still have some minor items to address under the plenum before I can put it back on.
Need to go out to the 74 at least 3 days this week. Have to make progress on that if I want to get it running by the Fall....

Re: TB removal and then some!!!
 

Valves threads sealed and reinstalled....
http://i127.photobucket.com/albums/p...619_161610.jpg
another view....ready to go...
http://i127.photobucket.com/albums/p...619_161647.jpg