ZR-1 Net Registry Forums
Page 13 of 82 « First 39101112 13 141516172363 Last »
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   TB removal and then some!!! (http://zr1.net/forum/showthread.php?t=27773)

HAWAIIZR-1 05-29-2017 08:12 AM
Re: TB removal and then some!!!
 
Quote:
Originally Posted by gtcollins@maxnet.co.nz (Post 262488)
Hi Craig my ZR-1 came from Japan in 2013- 2014 I have no history apart from it was first registered in Japan in 1992 my ZR-1 is 0308 1990 and was a California vehicle I wonder how or why it came to be in Japan could have been someone in the Military who knows and maybe if you don't take your ZR-1 home it may end up in New Zealand
Regards Glen

Sent from my SM-G930F using ZR-1 Net Registry mobile app
Hello Glen,

I really admire you folks overseas that have these or any foreign cars as I know how difficult resourcing what you need is and the cost related. I was here in 2013-2014 and really curious to know who's car that was and how it ended up in Japan, then New Zealand. Funny you mention it, I have a friend from New Zealand that has lived here for a long time and he is an auto exporter shipping cars here in Japan all over the world. Basically cars over 5 years old are gotten rid of. I'll have to mention to him the next time we meet. I'm pretty sure this Z won't be going back to the US, but I might give it up in about 5 years. There is no market here for our cars. Thanks for sharing.
Craig

gtcollins@maxnet.co.nz 05-29-2017 02:12 PM
Re: TB removal and then some!!!
 
Quote:
Originally Posted by gtcollins@maxnet.co.nz (Post 262488)
Hi Craig my ZR-1 came from Japan in 2013- 2014 I have no history apart from it was first registered in Japan in 1992 my ZR-1 is 0308 1990 and was a California vehicle I wonder how or why it came to be in Japan could have been someone in the Military who knows and maybe if you don't take your ZR-1 home it may end up in New Zealand
Regards Glen

Sent from my SM-G930F using ZR-1 Net Registry mobile app
Hi Tom
When I painted the top of my engine I did it in bass coat clear coat so I paint the silver first then I tried to paint the black with a brush all it did was make gray so I then clear coated over the hole manifold once dry I sanded the whole lot down with 400 sand paper then I masking taped the area of and painted it when dry I sanded the excess paint of then clear coated over the hole manifold once again here is a photos of the job hopefully this makes sense
Regards Glen https://uploads.tapatalk-cdn.com/201...2d94c0f872.jpghttps://uploads.tapatalk-cdn.com/201...05ecc99d88.jpghttps://uploads.tapatalk-cdn.com/201...a887508934.jpg

Sent from my SM-G930F using ZR-1 Net Registry mobile app

mgbrv8 05-29-2017 03:16 PM
Re: TB removal and then some!!!
 
1 Attachment(s)
Tom I may have miss this in previous comments but what is this anomaly on the surface?

Dave

Roadster 05-29-2017 03:25 PM
Re: TB removal and then some!!!
 
Quote:
Originally Posted by gtcollins@maxnet.co.nz (Post 262501)
Hi Tom
When I painted the top of my engine I did it in bass coat clear coat so I paint the silver first then I tried to paint the black with a brush all it did was make gray so I then clear coated over the hole manifold once dry I sanded the whole lot down with 400 sand paper then I masking taped the area of and painted it when dry I sanded the excess paint of then clear coated over the hole manifold once again here is a photos of the job hopefully this makes sense
Regards Glen

Looking good Glen, thanks for the idea....

Sent from my SM-G930F using ZR-1 Net Registry mobile app
Looking good Glen, thanks for the idea....

Quote:
Originally Posted by mgbrv8 (Post 262505)
Tom I may have miss this in previous comments but what is this anomaly on the surface?

Dave
Dave, I have no clue, as that is Glen's plenum. I also did not take notice until you just pointed that out. Hopefully he will see the post and respond. I would imagine that would need a repair. It's weird as it appears in one pic and not the other. So maybe it was repaired before he put the final finish on the plenum...

gtcollins@maxnet.co.nz 05-29-2017 04:07 PM
Re: TB removal and then some!!!
 
Quote:
Originally Posted by mgbrv8 (Post 262505)
Tom I may have miss this in previous comments but what is this anomaly on the surface?

Dave
Hi here is a photo of the area now it's finished https://uploads.tapatalk-cdn.com/201...4006699bb7.jpg


Sent from my SM-G930F using ZR-1 Net Registry mobile app

gtcollins@maxnet.co.nz 05-29-2017 04:13 PM
Re: TB removal and then some!!!
 
Hi again I don't remember doing the repair you can see a repair I did on the other side it was a few weeks between the first clear coat and the letters getting done and some how the plenum got a small chip

Sent from my SM-G930F using ZR-1 Net Registry mobile app

Flyman 27 05-29-2017 05:11 PM
Re: TB removal and then some!!!
 
Quote:
Originally Posted by gtcollins@maxnet.co.nz (Post 262464)
Hi All I have my car in bits and over Christmas I refinished the top of the engine I used base coat clear coat to do the job the letters are base coat over clear and recleared coated again here is the finished photos and a before and after of the air intake https://uploads.tapatalk-cdn.com/201...3e0de3e57f.jpghttps://uploads.tapatalk-cdn.com/201...b00911fd55.jpghttps://uploads.tapatalk-cdn.com/201...abfa6f9b07.jpg

Sent from my SM-G930F using ZR-1 Net Registry mobile app
How did you get that "ZR-1" on your air horn? That is awesome.
Is it hand painted? Decal?

gtcollins@maxnet.co.nz 05-29-2017 05:39 PM
Re: TB removal and then some!!!
 
Hi I had a decal made and then painted the red removed the decal sanded and clear coated

Sent from my SM-G930F using ZR-1 Net Registry mobile app

Flyman 27 05-29-2017 06:57 PM
Re: TB removal and then some!!!
 
Where did you get the image file? That is really a nice look! Care to share?

gtcollins@maxnet.co.nz 05-29-2017 07:38 PM
Re: TB removal and then some!!!
 
I got the original picture of Jerry website and give it to a sign writer and they did the rest

Sent from my SM-G930F using ZR-1 Net Registry mobile app


All times are GMT -4. The time now is 06:05 AM.
Page 13 of 82 « First 39101112 13 141516172363 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025