Re: OBX Headers?
 

mgbrv8,

Any update on the install?

Re: OBX Headers?
 

Ya I am sorry I have been a little busy with other projects, well and now I am trying to recover from three days of debortury. But when I do I will post it as soon as possible.

Dave

Re: OBX Headers?
 

I am thinking about using studs on my headers. But how long of a stud would you guys run?? And would you guys use the original spacers?

Dave

Re: OBX Headers?
 

Thanks to all the guys at BG this year for all of the great ideas on how to spend money on my car. Headers have been on the list for a while. I like the StainlessWorks units, but was pointed at the OBX at BG.

1) How did this install of the OBX work out?
2) It looks like the OBX collectors are slip fit with clamps, I've had problems with leaks trying to clamp SS pipes in the past.
3) Are the StainlessWorks headers fully welded or some assembly required too?

Trying to work through that $700 decision.

Had a great time at BG in 2012 and want to give special thanks to the FBI, Gordon Killibrew and Mark Haibeck for the fine hospitality for my son and I Friday night.

Re: OBX Headers?
 

I had a local shop do my OBX headers and exhaust. He charged me $750 for the install of headers and exhaust. I had him weld some of the non critical joints. I supplied him with Stage 8 bolts. He could not get the retaining clips on. I need to bitch at Stage 8 someday. So far I am pleased I went OBX and not S.W. Saved a ton of dough. I also had the headers ceramic coated by Swaintech. I went with their white lightning coating. It's not the prettiest, but retains a ton of heat, far more pretty coatings. It's all about performance baby. It was at BG, shame we didn't have a chance to hook up, you could have had a good look at it. -Steve

Re: OBX Headers?
 

i would take a long look at the headers that corey henderson makes . i have a set on my 90 zr1 and a set of stainless works on my 92 the obx are exactly like them .the obx/stainless works made 17 less rwhp on my 92 . i found this out by switching the headers off my 90 to my 92 . coreys headers pipe lengths are between 22in to 24 in where the stainless works/ obx lengths are from 10 in to 22 in . i used the same dyno for both tests and allthough it was months between the 2 tests .i can feel the difference and at the drag strip gained 2.5 tenths and 1.7 mph by switching .coreys product is first cabin and isnt that much more than the obx considering that they come coated .jmho

Re: OBX Headers?
 

by gained i mean 2.5 tenths less . just to clear that up

Re: OBX Headers?
 

Do you have a link to these headers?

Re: OBX Headers?
 

http://www.ebay.com/itm/OBX-Exhaust-...11b38b&vxp=mtr

Dave

Re: OBX Headers?
 

Hi Dave: Was hoping for the link to the Corey headers...