01-18-2014 | #1 |
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Headers & exhaust
I have 90 zr1 bought it 5 months ago looking to up grade exhaust ,like to do headers is it woth the money & noticeable hp Gaines & what brand, wher to get em. What about mufflers or cat back system? I think resanator is stock,Car has flow master mufflers they look ugly looks like 4 tubes coming out of the rear, correct me if I'm wrong stock resonator has no cuts going to y pipe it's all one ,mines cut with clamps to muffler with clamps, resonator has no markings so I'm guessing stock sounds good but looks like crap.any info or pics would greatly appreciate it thanks.
|
01-18-2014 | #2 | |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,096
|
Re: Headers & exhaust
Quote:
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
01-18-2014 | #3 |
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,170
|
Re: Headers & exhaust
The best way to tell if you have a stock resonator is two pipes in two out, the Flowmaster resonator has both pipes join into one 3" pipe at the inlet than 2 out.
I did my header Stainless Works coated long tube as my first mod many years ago 08 and was very happy with the results. They have held up very well still look great. I have them hooked to 3" high flow cats and Corsa passes the treadmill test for emission with no problem.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
01-18-2014 | #4 |
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Headers & exhaust
If reasanateris stock ,is there hp to gain if replaced with b&b or corsa.
|
01-18-2014 | #5 |
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Headers & exhaust
Don't need converters ,so headers ,full exhaust will gain about 35-40 hp .
|
01-18-2014 | #6 | |
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,170
|
Re: Headers & exhaust
Quote:
http://www.stainlessworks.net/1990-9...onn-point.html
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 01-18-2014 at 12:18 PM. |
|
01-18-2014 | #7 |
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
|
Re: Headers & exhaust
Don't really like tips on these after market mufflers,maybe can do flowmaster with single outlet & 95 tips. Lets go back in time does any one remember flowmaster had a cat system 3inch exhaust with 90-92 tips
|
01-18-2014 | #8 |
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,170
|
Re: Headers & exhaust
Tom,
I just took the old type ZR-1 cat back Flowmasters off they do not sell it anymore. I'm putting on my LT1 car.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 01-18-2014 at 12:32 PM. |
01-18-2014 | #9 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,096
|
Re: Headers & exhaust
If your resonator is a stock 90 unit, there are gains available. Marc's presentation on exhausts clearly demonstrates that. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
01-18-2014 | #10 |
Join Date: Nov 2013
Location: ..
Posts: 693
|
Re: Headers & exhaust
I think long tube headers are well worth it. Very good gains throughout the whole rpm range and especially high rpms. The previous owner of my car bought the DRM ceramic coated long tube headers and he put the flowmaster force II exhaust system on it. He lived in pennsylvania and he had to pass emissions so he took the cats off and put the flowmaster resonator which he convinced them were cats. This car passed emissions every year and the stickers are on my windshield to prove it. the car sounds great with no mid rpm drone that most systems have. the corsa's sound tinny, ratty and the horsepower gains are not substantial and debateable. Unfortunately you cannot get the flowmaster system any more so you would have to make choices here. Definately get long tube headers if you want to really take advantage of your ZR1's power. I would go for the best sounding system as far as cat back exhaust is concerned. You are not talking a bunch of horsepower difference here. the gain in horsepower will be with your long tube headers. get the best sounding catback and dont get caught in that 1 horsepower or 2 horsepower counting game that most manufacturers want to you believe. does it matter if your catback makes 2 horsepower less on a particular day and on a particular car anyway... it just has to sound the way you like it.
edramos #3028 |
|
|