Z06 rear brake adapters Winter Project - Page 3 - ZR-1 Net Registry Forums

GOLDCYLON · 10-24-2014

Ok trying to match the front end somebody has to have a solution to retain the parking brake on the standard size rotor I'd imagine. Thanks GC

XfireZ51 · 10-24-2014

Quote:

Originally Posted by GOLDCYLON

Ok trying to match the front end somebody has to have a solution to retain the parking brake on the standard size rotor I'd imagine. Thanks GC

Have u checked w =Jeff=? He's using 87 eBrake mechanicals for rear.

GOLDCYLON · 10-24-2014

No but I will

-=Jeff=- · 10-25-2014

GC stock rear c5 will work with the adapters Dominic has

I just have trouble with the $700 then having to cut and mod things. I am working out a solution to use the 87 adapter then you need the 87 wilwood kit..

I will have more info for my rear set-up in a few weeks.. Using C6 calipers

-=Jeff=- · 10-25-2014

GC call me if you want to

GOLDCYLON · 10-25-2014

Quote:

Originally Posted by -=Jeff=-

GC call me if you want to

Jeff pm me your number

USAFPILOT · 11-10-2016

Quote:

Originally Posted by -=Jeff=-

GC stock rear c5 will work with the adapters Dominic has

I just have trouble with the $700 then having to cut and mod things. I am working out a solution to use the 87 adapter then you need the 87 wilwood kit..

I will have more info for my rear set-up in a few weeks.. Using C6 calipers

did you ever work out a solution that would allow the 87 kit?

-=Jeff=- · 11-10-2016

Quote:

Originally Posted by USAFPILOT

did you ever work out a solution that would allow the 87 kit?

It never got installed but here is what I had come up with..

First off the 87 Brake adapter needs to be machined to fit on the 89-later rear knuckle. I have a set that are machined. There is a thin spacer (I forget if it goes against the knuckle or elsewhere in line, I need to look again. The adapter and spacer give you the same depth as the OE Caliper mount on the 89-later

Now you have options for the Caliper assemblies:

OEM 87 stuff
Wilwood 87 later kit
C5 Caliper adapter brackets (Source on eBay), rotors and modified 87 brake shoes to fit the C5 rotors along with C5 Calipers. I forget which rotors will work, but I bought a set.

I actually have a set fo Brembos (big 4 piston calipers) that could be used on the rear, with 2 pc rotors and I have the correct hats with drum in them. I think the Brembo Calipers are a bit too big for me, but if you had a bigger front caliper these would work fine. I even think my 2 pc rotors will work with the Wilwood brackets and Calipers. I never finished mocking it all up, I think it could be done fairly easy, I think WV offered to send me a Knuckle to mock it all up..

I was going to do Brembos front and rear, but swapped for the 6 piston Wilwoods in front and sold the front Brembos.. just never did anything with the rear

10-24-2014	#21
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,152	Re: Z06 rear brake adapters Winter Project Ok trying to match the front end somebody has to have a solution to retain the parking brake on the standard size rotor I'd imagine. Thanks GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

10-24-2014	#23
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,152	Re: Z06 rear brake adapters Winter Project No but I will __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

10-25-2014	#24
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,131	Re: Z06 rear brake adapters Winter Project GC stock rear c5 will work with the adapters Dominic has I just have trouble with the $700 then having to cut and mod things. I am working out a solution to use the 87 adapter then you need the 87 wilwood kit.. I will have more info for my rear set-up in a few weeks.. Using C6 calipers __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

10-25-2014	#25
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,131	Re: Z06 rear brake adapters Winter Project GC call me if you want to __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978