|
04-18-2011
|
#1 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Source For Exhaust Manifold Bolts
I need to buy exhaust manifold bolts ASAP. Who is the best source for the bolts? Does GM still make them?
Thanks Brett
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 04-19-2011 at 10:35 AM. |
|
|
|
04-18-2011
|
#2 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Source For Exhaust Manifold Bolts
Jerry has a couple of them-click it to say Doh!
I bookmarked it because I thought mine was missing hardware, but it turns out they only used 7 out of 16 possible fasteners anyhow. |
|
|
|
|
04-19-2011
|
#3 | |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Source For Exhaust Manifold Bolts
Quote:
Thanks, Mike. I had looked at the website before posting this thread and didn't see it. 
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
|
04-19-2011
|
#4 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,191
|
Re: Source For Exhaust Manifold Bolts
Do those come with the steel spacer?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
04-19-2011
|
#5 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Source For Exhaust Manifold Bolts
Not sure. I'm going to call Jerry and make sure I get what I need. The motor goes in this weekend.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 04-19-2011 at 10:35 AM. |
|
|
|
|
04-19-2011
|
#6 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,373
|
Re: Source For Exhaust Manifold Bolts
OK gang, we need your help on these bolts. I have new bolts, but do not have the spacers & retainers. With the number of headers that have been installed, there should be some stock bolt/spacers around.
Help is appreciated!!!
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
04-19-2011
|
#7 | |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Source For Exhaust Manifold Bolts
Quote:
My goal is to install the engine with the manifolds attached, this Saturday. I suppose I could always install the manifolds "after" the engine but it sure would be easier to do it ahead of time.  I'll buy these from anyone willing to ship them ASAP. Thanks Brett!
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
|
04-19-2011
|
#8 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,373
|
Re: Source For Exhaust Manifold Bolts
BOLTS FOUND!!!!
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
04-19-2011
|
#9 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Source For Exhaust Manifold Bolts
I cannot get over the help available from Jerry and marc. This ZR1 niche' is by far the best of any segment of the Corvette community that I have been associated with over the past 30 yrs.
It's just amazing. Jerry spent most of the morning searching for bolts for me and won't even let me pay him for his trouble. The beer is on me at Bowling Green, Jerry and Marc. Jerry found some bolts from Marc Haibeck. Marc is sending them to me so I can get the engine installed this weekend. Thanks again, Jerry and Marc!!!!!!
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
04-19-2011
|
#10 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,643
|
Re: Source For Exhaust Manifold Bolts
Another shining example of the.........
Brotherhood of the Beast! Kudos to Jerry and Marc! TomC 'Crabs
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] |
|
|
|
 |
|
|
Linear Mode
