Lt5 ecm chip - ZR-1 Net Registry Forums

Theg · 01-30-2018

Hello all .
Has anyone seen one of these chips pictured ? Ive googled round the net and am unable to find any info on it . Would like to find out a bit about its programming.
Its in an unfinished hot rod and I havnt started the engine since aquiring it .

WVZR-1 · 01-30-2018

Back in '99 - '01 or so this would have been contact information. Today I've no idea. Some might have maintained contact or maybe be more familiar.

Ron Zimmer at Z-Industries in California. Ph: 714-779-6680

Hib Halverson a regular here would be the most likely to maybe be able to pass on information or put you in contact with.

If you have the VIN of the car the engine was from or maybe the VIN derivative from the engine it could be identified.

Reach out to this fellow:

https://www.corvetteforum.com/forums...post1591038204

Ccmano · 01-30-2018

I have one too. Z-Industries and Zimmer are no longer around. He was one of the early tuners. Apparently changes they made were conservative, but could have been customized for the the hot rod your engine was intended for.

The only way to really know is to get it to someone who can read the tune. Dominic (xfireZ51) here on the forum can help you out with that.
H

01-30-2018	#2
WVZR-1 Join Date: Oct 2004 Posts: 1,889	Re: Lt5 ecm chip Back in '99 - '01 or so this would have been contact information. Today I've no idea. Some might have maintained contact or maybe be more familiar. Ron Zimmer at Z-Industries in California. Ph: 714-779-6680 Hib Halverson a regular here would be the most likely to maybe be able to pass on information or put you in contact with. If you have the VIN of the car the engine was from or maybe the VIN derivative from the engine it could be identified. Reach out to this fellow: https://www.corvetteforum.com/forums...post1591038204 Last edited by WVZR-1; 01-30-2018 at 05:18 PM.

01-30-2018	#3
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Lt5 ecm chip I have one too. Z-Industries and Zimmer are no longer around. He was one of the early tuners. Apparently changes they made were conservative, but could have been customized for the the hot rod your engine was intended for. The only way to really know is to get it to someone who can read the tune. Dominic (xfireZ51) here on the forum can help you out with that. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.