INFL light - ZR-1 Net Registry Forums

bobbyhi · 08-15-2005

Well, here I am writing for help about the typical 1990 famous "INFL LIGHT". I have followed all of the instructions listed in the FAQ part of the ZR1Net but to no avail. I have cleaned both sensers and I still get the "16" code. I have done the grounding 'til I'm blue in the face. I even bought the clearing switch from Mid America and still nothing....Can't get the code to clear. Very frustrating to say the least. Maybe a bad senser or bad DERM???
Any suggestions would be very helpful.

Don't know where the L98 came from under the name and don't know how to change that either!!!

zr1mom · 08-15-2005

The L98 is based on the number of posts you make here. Over time it will change from L98, to LT1, to LT4 and finally to LT5.

08-16-2005

Check the yellow wire under the dash area for proper connection. Pull it apart and clean it with electrical cleaner. Then try to clear the codes.

Also when clearing the codes, it is very sensitive that you follow the intervals.

bobbyhi · 08-16-2005

Thanks Jeffvette - I'll give it a try tomorrow.............

WB9MCW · 08-17-2005

ONCE U HIT 100 POSTS UR AN LT5

08-15-2005	#1
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	INFL light Well, here I am writing for help about the typical 1990 famous "INFL LIGHT". I have followed all of the instructions listed in the FAQ part of the ZR1Net but to no avail. I have cleaned both sensers and I still get the "16" code. I have done the grounding 'til I'm blue in the face. I even bought the clearing switch from Mid America and still nothing....Can't get the code to clear. Very frustrating to say the least. Maybe a bad senser or bad DERM??? Any suggestions would be very helpful. Don't know where the L98 came from under the name and don't know how to change that either!!! Last edited by bobbyhi; 08-15-2005 at 09:05 PM.

08-15-2005	#2
zr1mom Join Date: Dec 2003 Location: New Hampshire Posts: 421	The L98 is based on the number of posts you make here. Over time it will change from L98, to LT1, to LT4 and finally to LT5. __________________ ZR-1 Mom Founder ZR-1 Net Registry Founder ZR-1 Net NCM Lifetime Member

08-16-2005	#4
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	INFL light Thanks Jeffvette - I'll give it a try tomorrow.............

08-17-2005	#5
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	L98-LT1-LT4-LT5 ONCE U HIT 100 POSTS UR AN LT5 __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

08-16-2005	#3
Jeffvette Guest Posts: n/a	Check the yellow wire under the dash area for proper connection. Pull it apart and clean it with electrical cleaner. Then try to clear the codes. Also when clearing the codes, it is very sensitive that you follow the intervals.