ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1s and ZR-1 Parts For Sale/Wanted

Reply
 
Thread Tools Display Modes
Old 08-29-2014   #11
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
Default Re: F/S Interior parts -mostly 1991

Quote:
Originally Posted by Locobob View Post
I can do paypal, not sure about the shipping on this particular part, I would think ups ground would be okay, hazardous? Any idea?
Last complete steeing wheel I received was via USPS so it wasnt a problem. If you shipped it with a power source it would be. As just the airbag I think it would be ok. Im sure ground UPS would not be a problem. i pmed you my shipping address. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 08-29-2014   #12
Locobob
 
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
Default Re: F/S Interior parts -mostly 1991

Quote:
Originally Posted by GOLDCYLON View Post
Last complete steeing wheel I received was via USPS so it wasnt a problem. If you shipped it with a power source it would be. As just the airbag I think it would be ok. Im sure ground UPS would not be a problem. i pmed you my shipping address. GC
Okay, I'm going to double box it to be safe and get a quote today.
__________________
Robert

ZR-1 Net Registry Oregon State Director

91 ZR-1 #431 Black/Black LPE 368
Locobob is offline   Reply With Quote
Old 08-29-2014   #13
batchman
 
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
Default Re: F/S Interior parts -mostly 1991

How many miles on that drivers' seat track, did you get to try it? Was it tight? I'm thinking the way I use mine to tighten the belts (once a mile!) I should probably consider keeping a spare.

Aaaaand, since you have one sitting there, could you tell me what fastener is used to attach the top of the passenger door vertical grab handle? Mine has gone bye-bye and I don't hear anything rattling in the bottom of the door - in case it's not stuck in there somewhere I'd like to have something ready when I get around to opening it up, hopefully before a passenger panics and pulls the thing off the door...

Thanks,
- Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's
DRM chip/Watson/Borla/lid/LW batt&headlights,
springs, shocks, pads & lines, quick rack & Turn One,
camber brace, 32/22mm sways, A/C halfway deleted
17x11 & 12 CCW's, 315 & 335 Hoosier A6s

[/I]
batchman is offline   Reply With Quote
Old 08-29-2014   #14
Locobob
 
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
Default Re: F/S Interior parts -mostly 1991

Quote:
Originally Posted by batchman View Post
How many miles on that drivers' seat track, did you get to try it? Was it tight? I'm thinking the way I use mine to tighten the belts (once a mile!) I should probably consider keeping a spare.

Aaaaand, since you have one sitting there, could you tell me what fastener is used to attach the top of the passenger door vertical grab handle? Mine has gone bye-bye and I don't hear anything rattling in the bottom of the door - in case it's not stuck in there somewhere I'd like to have something ready when I get around to opening it up, hopefully before a passenger panics and pulls the thing off the door...

Thanks,
- Jeff
The seat track came out of my car, its original as far as I know with 80K on it. I hardly ever used it, set and forgot.

The door pull is held on by a single fastener with a Z shaped bracket attached to it - 7mm socket head, appears to be the same style as used throughout the inside of the door panel.
__________________
Robert

ZR-1 Net Registry Oregon State Director

91 ZR-1 #431 Black/Black LPE 368
Locobob is offline   Reply With Quote
Old 08-29-2014   #15
ghlkal
 
ghlkal's Avatar
 
Join Date: Jan 2012
Location: Wisconsin
Posts: 882
Default Re: F/S Interior parts -mostly 1991

I'm interested in the DIC and climate control.

PM sent
__________________
1990 ZR-1 #2180 Red/Black
Many of the usual mods for 460HP, tuned by Marc Haibeck
ZR-1 Net Registry Member #1548
ghlkal is offline   Reply With Quote
Old 09-03-2014   #16
ghlkal
 
ghlkal's Avatar
 
Join Date: Jan 2012
Location: Wisconsin
Posts: 882
Default Re: F/S Interior parts -mostly 1991

Check mailed as you requested for the DIC and climate control

Thanks
__________________
1990 ZR-1 #2180 Red/Black
Many of the usual mods for 460HP, tuned by Marc Haibeck
ZR-1 Net Registry Member #1548
ghlkal is offline   Reply With Quote
Old 09-04-2014   #17
Locobob
 
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
Default Re: F/S Interior parts -mostly 1991

I also have a LT-5 engine lifting bracket I might sell if someone is interested... and another LT-5 tool which I think is valve service related, have to dig that out.
__________________
Robert

ZR-1 Net Registry Oregon State Director

91 ZR-1 #431 Black/Black LPE 368
Locobob is offline   Reply With Quote
Old 09-05-2014   #18
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: F/S Interior parts -mostly 1991

PM sent on the P Side seat track there Robert...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Old 09-08-2014   #19
ghlkal
 
ghlkal's Avatar
 
Join Date: Jan 2012
Location: Wisconsin
Posts: 882
Default Re: F/S Interior parts -mostly 1991

Robert, the DIC and climate control arrived today. Thanks for your fast shipping! The parts look great. I hope to get these in later this week.

Gary
__________________
1990 ZR-1 #2180 Red/Black
Many of the usual mods for 460HP, tuned by Marc Haibeck
ZR-1 Net Registry Member #1548
ghlkal is offline   Reply With Quote
Old 09-10-2014   #20
batchman
 
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
Default Re: F/S Interior parts -mostly 1991

Check is in the mail for the Drivers' seat track and the headlight bezel.

It's a long trip though, we'll see how the USPS is doing these days.,

Thanks,
- Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's
DRM chip/Watson/Borla/lid/LW batt&headlights,
springs, shocks, pads & lines, quick rack & Turn One,
camber brace, 32/22mm sways, A/C halfway deleted
17x11 & 12 CCW's, 315 & 335 Hoosier A6s

[/I]
batchman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020