Factory Camshaft timing procedure - ZR-1 Net Registry Forums

8upZR1 · 06-09-2006

Can anyone outline for me the method that the factory used to time the camshafts on these motors? I used the method outlined in the Haibeck article and wanted to know the difference.

TheLurker · 06-10-2006

They used pins and had a fixture that actually locked in two holes on the venier and then were able to tighten the cam bolt to the required torque.

06-09-2006	#1
8upZR1 Join Date: Jun 2006 Location: Thunderbolt, Ga. Posts: 253	Factory Camshaft timing procedure Can anyone outline for me the method that the factory used to time the camshafts on these motors? I used the method outlined in the Haibeck article and wanted to know the difference. __________________ IT IS THE FATE OF THE INNOCENT TO MEET WITH DEATH!!!

06-10-2006	#2
TheLurker Join Date: Sep 2005 Location: Dallas, Texas Posts: 14	Re: Factory Camshaft timing procedure They used pins and had a fixture that actually locked in two holes on the venier and then were able to tighten the cam bolt to the required torque.