NEW Fuel Pressure Regulator coming very soon! - ZR-1 Net Registry Forums

A26B · 05-20-2020

We are pretty excited about this and couldn't wait until everything was ready to ship before spilling the beans.

Jerrys Gaskets has developed a brand new, direct replacement, Fuel Pressure Regulator for the LT5. It is based on the Lingenfelter and Wasinger modifications to the original regulator.

Instead of trying to utilize the original regulator body and deal with core exchanges and small run delays, we chose to make the "body" all new, from billet aluminum. It will utilize the proven 3.5bar/350kPa regulator. We will also have available, 4.0bar/400kPa regulators. Regulators will come with Viton o-ring seals and nitrile diaphram for compatibility with ethanol blended gasoline fuel.

Each Fuel Pressure Regulator will come fully assembled, with a complete set of Viton o-ring seals for the fuel rail/regulator piping and fuel feed & return block.

We hope you like it!

Pre-anodized regulator body, inside view

Anodized regulator assembly

05-20-2020	#1
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,374	NEW Fuel Pressure Regulator coming very soon! We are pretty excited about this and couldn't wait until everything was ready to ship before spilling the beans. Jerrys Gaskets has developed a brand new, direct replacement, Fuel Pressure Regulator for the LT5. It is based on the Lingenfelter and Wasinger modifications to the original regulator. Instead of trying to utilize the original regulator body and deal with core exchanges and small run delays, we chose to make the "body" all new, from billet aluminum. It will utilize the proven 3.5bar/350kPa regulator. We will also have available, 4.0bar/400kPa regulators. Regulators will come with Viton o-ring seals and nitrile diaphram for compatibility with ethanol blended gasoline fuel. Each Fuel Pressure Regulator will come fully assembled, with a complete set of Viton o-ring seals for the fuel rail/regulator piping and fuel feed & return block. We hope you like it! Pre-anodized regulator body, inside view Anodized regulator assembly __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.