|
05-12-2017
|
#1 |
 Join Date: Jul 2012
Location: Michigan
Posts: 182
|
banski suspesion parts
anybody got banski rear suspension on their Z? thoughts?
have heard some coilovers will interfere with clamp on trailing arms?
__________________
Ron Thompson 1990 421ci ZR-1 2010 ZR1 (stock) |
|
|
|
05-12-2017
|
#2 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: banski suspesion parts
Quote:
I am running DRM coil overs and there are no problem with clearance with my Banski trailing arms
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
05-12-2017
|
#3 | |
|
Join Date: Jul 2012
Location: Michigan
Posts: 182
|
Re: banski suspesion parts
Quote:
__________________
Ron Thompson 1990 421ci ZR-1 2010 ZR1 (stock) |
|
|
|
|
|
05-12-2017
|
#4 | |
 
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,002
|
Re: banski suspesion parts
Quote:
|
|
|
|
|
|
05-13-2017
|
#5 |
|
Join Date: Aug 2013
Location: Holland
Posts: 80
|
Re: banski suspesion parts
Full Banski rear suspension together with Coilover kit from DRM, no clearance problems at all.
If you like I can send pictures to you.... |
|
|
|
|
05-13-2017
|
#6 |
 Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
|
Re: banski suspesion parts
love the banski stuff. the parts are high quality, much lighter than stock, and the heim joints eliminate the "sticktion" caused by the rubber bushings rubbing the mounting bracked to free up the rear travel tremendously.
I haven't yet seen if it helps the 60 ft time and the diggs but the handling and ride is noticeable better. I have the DRM shocks and indeed did have some problems with the springs rubbing the half shafts until I fiddled with the spring a bit. overall I'd for sure do the banski stuff, really like their products.
__________________
95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP) |
|
|
|
|
05-14-2017
|
#7 |
|
Join Date: Jul 2012
Location: Michigan
Posts: 182
|
Re: banski suspesion parts
Are you guys with the banski stuff using the drm brackets as well?
__________________
Ron Thompson 1990 421ci ZR-1 2010 ZR1 (stock) |
|
|
|
 |
|
|
Linear Mode
