10-12-2022 | #6 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Reluctantly joining the catch can club
The LT5 tends to need a 'BANDAID" too.
I installed mine (a Moroso) on my '90 and it seems to have cured that oil issue recovered from the PCV loop. I used metal braded lines following the stock route and then wrapped to the catch can return line to the catch can placed in the well in front of the left front tire. It actually looks good (once I finished routing the braided lines to the stock route, except for the detour to the catch can and back). And, the Moroso can has a dump valve on the bottom. I routed the dump outlet hose to a opening in the wheel well. Works good!
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|