|
08-07-2019
|
#1 |
 
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Emblem question
Are the side emblems the same size as the rear?
Thanks Matt Sent from my XT1710-02 using Tapatalk
__________________
1991 ZR-1 #520 Arctic White/Gray |
|
|
|
08-08-2019
|
#2 |
 
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,566
|
Re: Emblem question
Yes, same.
Marty |
|
|
|
|
08-08-2019
|
#3 |
|
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Re: Emblem question
Anyone know the measurements for placement?
Thanks Matt Sent from my XT1710-02 using Tapatalk
__________________
1991 ZR-1 #520 Arctic White/Gray |
|
|
|
|
08-08-2019
|
#4 |
|
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,566
|
Re: Emblem question
5 and 3/4 from the rear edge.
1 and 7/8 from the bottom edge. Marty |
|
|
|
|
08-09-2019
|
#5 |
Join Date: Aug 2004
Location: Spring Grove ,Pa.
Posts: 251
|
Re: Emblem question
I never cared for putting the hood emblems on the 90 and 91 cars. With my first 91 I resisted the temptation. But now with my current car I find myself in a bit of a dilemma. One of the previous owners added just one to the left driver side. Not sure of the story on this. Whether he could only find one and so installed just the one. But there you have it. I have been looking for another Turquoise Metallic 42U to go on the right side. I recently had the car paint corrected and asked the guy doing the work what he thought about possibly removing it. He said better off to leave it as if it has been on the car long enough it might leave an outline if removed.
__________________
91 Turquoise Metallic Haibeck 525 #0134 |
|
|
|
|
08-09-2019
|
#6 |
|
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Re: Emblem question
Got them installed. I chose not to drill holes in my hood and ground off the pegs with a Dremel.
MattIMG_20190809_143022953.jpg Sent from my XT1710-02 using Tapatalk
__________________
1991 ZR-1 #520 Arctic White/Gray |
|
|
|
|
08-09-2019
|
#7 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,137
|
Re: Emblem question
I have the LT5 emblems on the hood of my 1990
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
08-10-2019
|
#8 | |
|
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,566
|
Re: Emblem question
Quote:
Marty |
|
|
|
|
 |
|
|
Linear Mode
