RH upgraded Cam tensioner impressions - ZR-1 Net Registry Forums

GOLDCYLON · 03-22-2011

While I was out of town over the last three weeks TDY I had the ZFDOC install a new RH Cam tensioner upgrade kit. As discussed here. Pic below was taken from this thread the upgrade consisted of an aluminum housing that collected more oil. Note that the tensioner in the kit comes "loaded" or compressed.

http://www.zr1.net/forum/showthread....663&post105663

While I know its "normal" for some of our cars to be a little rattlely at start up... to me.... it was just plain unnerving. My car would sound like the cams on the passenger side were going to fly out of it. I can tell you this is a outstanding upgrade to get if your car is doing the same thing. If you look at the above post you can see pics posted up on the differences.

I know GM would never call this chain rattle a defect just like those famous Multech MY 90 Fuel injectors however my hats off to the engineer who resolved the problem by allowing more oil to be cupped in order to remove almost ALL ofthe rattle. My results were fantastic and I highly reccomend getting this kit. The kit is pricey but it includes a brand new tensoner as well so.... Your mileage may vary. I highly recommend this mod. GC out

limey · 03-22-2011

Carter, you out there? Need some of these housing made.

GC got the last one!

GOLDCYLON · 03-23-2011

Holly crap!!!!!

tomtom72 · 03-23-2011

Okay, I know I'm not swift on the uptake....so we have to make these....well I mean we have to get a sample of one so Carter can reverse engineer it so Carter make them....do I understand the situation correctly?

These are nla at GM right? So we have to keep our eyes on e-bay to buy one for our reverse engineering project, right?

Tom

-=Jeff=- · 03-23-2011

Quote:

Originally Posted by tomtom72

Okay, I know I'm not swift on the uptake....so we have to make these....well I mean we have to get a sample of one so Carter can reverse engineer it so Carter make them....do I understand the situation correctly?

These are nla at GM right? So we have to keep our eyes on e-bay to buy one for our reverse engineering project, right?

Tom

Tom, That sounds about right

GOLDCYLON · 03-23-2011

Quote:

Originally Posted by -=Jeff=-

Tom, That sounds about right

No not quite. You didnt add the part where Cliff implied im a butt head for not sending off the susposed "last one" (hell I had no idea) off to Carter first who responded two days after my final post BTW in that thread.

Holly crap was my "more forthcoming response" Cliff because I just realized I hosed up a chance to "help" the community. I had not even looked at that thread again until last night when I posted up my impressions to find a picture I remembered being in there. Now I read to the bottom where Carter offered to help.

So "Holly crap" I guess I am a total self serving AZZHOLE. Thanks for pointing that out to the entire community. Next time I go TDY for almost 4 weeks i'll make sure I reread all the posts again on my work laptop.

tomtom72 · 03-23-2011

No your not Daryl, you didn't realize what the conversation was at the time you decided to have your issue repaired.

If I was paying more attention, I would have started looking for one a long time ago....I didn't do it either so I'm just as much an A-HOLE as the next guy!

If I find one, I'll buy it and send it to Carter to do whatever we need to do to reproduce this stuff.

Tom

GOLDCYLON · 03-23-2011

Quote:

Originally Posted by tomtom72

No your not Daryl, you didn't realize what the conversation was at the time you decided to have your issue repaired.

If I was paying more attention, I would have started looking for one a long time ago....I didn't do it either so I'm just as much an A-HOLE as the next guy!

If I find one, I'll buy it and send it to Carter to do whatever we need to do to reproduce this stuff.

Tom

Thanks Tom. Jerry asked me scans for the GM install sheets. I still have that and I am sending the scans of it tonight to Jerry. I will send those to whomever wants them as well. I think we will ALL be looking for that housing to pop up again. GC

tomtom72 · 03-23-2011

to ya Daryl!

Do you suppose if I begged on my hands & knees at the gathering this year some engineer, either presently employed or retired, at the BG factory would go dig up the blue prints and make a copy for us?????

GOLDCYLON · 03-23-2011

Quote:

Originally Posted by tomtom72

to ya Daryl!

Do you suppose if I begged on my hands & knees at the gathering this year some engineer, either presently employed or retired, at the BG factory would go dig up the blue prints and make a copy for us?????

Right after the multech fuel injectors MY90 redesign sheets are done.

03-22-2011	#1
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,152	RH upgraded Cam tensioner impressions While I was out of town over the last three weeks TDY I had the ZFDOC install a new RH Cam tensioner upgrade kit. As discussed here. Pic below was taken from this thread the upgrade consisted of an aluminum housing that collected more oil. Note that the tensioner in the kit comes "loaded" or compressed. http://www.zr1.net/forum/showthread....663&post105663 While I know its "normal" for some of our cars to be a little rattlely at start up... to me.... it was just plain unnerving. My car would sound like the cams on the passenger side were going to fly out of it. I can tell you this is a outstanding upgrade to get if your car is doing the same thing. If you look at the above post you can see pics posted up on the differences. I know GM would never call this chain rattle a defect just like those famous Multech MY 90 Fuel injectors however my hats off to the engineer who resolved the problem by allowing more oil to be cupped in order to remove almost ALL ofthe rattle. My results were fantastic and I highly reccomend getting this kit. The kit is pricey but it includes a brand new tensoner as well so.... Your mileage may vary. I highly recommend this mod. GC out __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 03-22-2011 at 11:40 PM.

03-22-2011	#2
limey Join Date: Oct 2008 Location: tampa Posts: 539	Re: RH upgraded Cam tensioner impressions Carter, you out there? Need some of these housing made. GC got the last one!

03-23-2011	#3
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,152	Re: RH upgraded Cam tensioner impressions Holly crap!!!!! __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

03-23-2011	#4
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: RH upgraded Cam tensioner impressions Okay, I know I'm not swift on the uptake....so we have to make these....well I mean we have to get a sample of one so Carter can reverse engineer it so Carter make them....do I understand the situation correctly? These are nla at GM right? So we have to keep our eyes on e-bay to buy one for our reverse engineering project, right? Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

03-23-2011	#7
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: RH upgraded Cam tensioner impressions No your not Daryl, you didn't realize what the conversation was at the time you decided to have your issue repaired. If I was paying more attention, I would have started looking for one a long time ago....I didn't do it either so I'm just as much an A-HOLE as the next guy! If I find one, I'll buy it and send it to Carter to do whatever we need to do to reproduce this stuff. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member