Aluminum flywheel.... new clutch? - ZR-1 Net Registry Forums

zr1assassin · 10-17-2018

Thinking about swapping out to an aluminum flywheel, do you have to or need to get a new clutch when swapping flywheel? Car a 92' has 20k miles so I'm assuming clutch wear is minimal.
Looking at a fidanza 198551

A26B · 10-17-2018

FYI: converting from a dual mass flywheel will result in transmission rattle which is loudest when in neutral with clutch engaged.
The Fidanza FW weighs in at 13-14 lbs
Jerrys Gaskets has custom manufactured aluminum FW’s at both 18 & 22 lbs. read more about applications & benefits;

http://www.jerrysgaskets.com/flywhee...let-90-95-0b3/

http://www.jerrysgaskets.com/flywhee...let-90-95-0b1/

Sent from my iPhone using ZR-1 Net Registry

Vette73 · 10-17-2018

My fidanza sounds like a sawz-all at times up until 2,500 RPM......All though the motor will spin up much faster .....The gear rattle in neutral really doesn't bother me......I hear some have used a sprung hub disc to mitigate the noise.....

No,stock clutch can be used....I did and I was at 46 k...

zr1assassin · 10-17-2018

Quote:

Originally Posted by Vette73

My fidanza sounds like a sawz-all at times up until 2,500 RPM......All though the motor will spin up much faster .....The gear rattle in neutral really doesn't bother me......I hear some have used a sprung hub disc to mitigate the noise.....

No,stock clutch can be used....I did and I was at 46 k...

Just swapped out flywheel and that's it?

Demps · 10-17-2018

I have Fidanzas in three cars. I'd follow Jerry's suggestions.

If you choose Fidanza, I would replace the clutch disk and make sure it's a spring hub and minimum thickness. Be sure to clean the frictions surface on the flywheel.

Ted

zr1assassin · 10-17-2018

Quote:

Originally Posted by Demps

I have Fidanzas in three cars. I'd follow Jerry's suggestions.

If you choose Fidanza, I would replace the clutch disk and make sure it's a spring hub and minimum thickness. Be sure to clean the frictions surface on the flywheel.

Ted

Recommendations on a disc/sprung hub?

efnfast · 10-17-2018

I think I have a Fidanza for sale. I might have sold it.

zr1assassin · 10-17-2018

Quote:

Originally Posted by efnfast

I think I have a Fidanza for sale. I might have sold it.

I just ordered one 20min ago lol

Vette73 · 10-17-2018

Quote:

Originally Posted by zr1assassin

Recommendations on a disc/sprung hub?

I hear part # 381039 from summit racing is a good choice...

zr1assassin · 10-17-2018

Quote:

Originally Posted by Vette73

I hear part # 381039 from summit racing is a good choice...

Awesome thank you

10-17-2018	#1
zr1assassin Join Date: May 2012 Location: saint joseph mo Posts: 465	Aluminum flywheel.... new clutch? Thinking about swapping out to an aluminum flywheel, do you have to or need to get a new clutch when swapping flywheel? Car a 92' has 20k miles so I'm assuming clutch wear is minimal. Looking at a fidanza 198551

10-17-2018	#2
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,374	Re: Aluminum flywheel.... new clutch? FYI: converting from a dual mass flywheel will result in transmission rattle which is loudest when in neutral with clutch engaged. The Fidanza FW weighs in at 13-14 lbs Jerrys Gaskets has custom manufactured aluminum FW’s at both 18 & 22 lbs. read more about applications & benefits; http://www.jerrysgaskets.com/flywhee...let-90-95-0b3/ http://www.jerrysgaskets.com/flywhee...let-90-95-0b1/ Sent from my iPhone using ZR-1 Net Registry __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 10-17-2018 at 08:17 PM.*

10-17-2018	#3
Vette73 Join Date: Nov 2014 Location: Brooklyn ny Posts: 1,045	Re: Aluminum flywheel.... new clutch? My fidanza sounds like a sawz-all at times up until 2,500 RPM......All though the motor will spin up much faster .....The gear rattle in neutral really doesn't bother me......I hear some have used a sprung hub disc to mitigate the noise..... No,stock clutch can be used....I did and I was at 46 k...

10-17-2018	#5
Demps Join Date: Jan 2006 Location: Niceville Posts: 997	Re: Aluminum flywheel.... new clutch? I have Fidanzas in three cars. I'd follow Jerry's suggestions. If you choose Fidanza, I would replace the clutch disk and make sure it's a spring hub and minimum thickness. Be sure to clean the frictions surface on the flywheel. Ted

10-17-2018	#7
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,261	Re: Aluminum flywheel.... new clutch? I think I have a Fidanza for sale. I might have sold it.