ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 08-08-2015   #31
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,669
Default Re: Whats Next?

We should probably let Lee have his thread back. Maybe start a new one. Paul is correctly characterizing my discussion. It really goes back to breathing more lift/duration or more valves. I feel that a OHV motor is optimized for a particular region of the rpm band whereas an OHC 4 valve has great breathing ability without as much of a sacrifice to reasonable part throttle and idling characteristics. When it comes to all out performance, it's clear GM has decided on the in block cam config and for a lot of very good reasons like packaging, weight, center of gravity, simplicity, hood line, etc, etc. and w the engine management capability of today's processors, the LS/LT motors can really be made to perform and behave all at the same time.
Commenting on the cylinder head, my point was really about how capable the LT-5 heads are given they were designed for a 5.7ish L motor and yet can be found supporting motors of nearly 26% more displacement. In addition, it's all we've got, there ain't no more. no AFR, no TrickFlow, no Brodix, no nuthin'.
Not to mention crank and cams. It's all on us here. Nobody out there helping us out. Just like Lee here doing it pretty much on his own, his own time, his own money. That's why I admire the LT-5.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 08-08-2015   #32
Bearly Flying
 
Join Date: Dec 2012
Location: Ponoka, Alberta, Canada
Posts: 158
Default Re: Whats Next?

"Well, perhaps that's all that matters to some. But, to others, myself included, a rough-idling, over-heating in traffic, often stalling beast with high stall rpm converters, or no off-idle torque...is no fun to drive: been there, done that! "


So have I, trip to B.C. last year, car was stumbling, flooding. Stop and Go traffic was a killer. Turned out to be O2 sensors, but that trip was a nightmare.


Lee's experiment was good, altho the results weren't what was expected, it may provide some insight to the next step.
__________________
91 ZR-1 Arctic White/Gray
01 C-5 Magnetic Red/Black
85 FJ 1100 (Big Bore kit, Hooligan Bike)
05 FJR 1300 Yamaha (Long Distance, Sport Touring)
And a whole whack of RC Planes
Bearly Flying is offline   Reply With Quote
Old 08-10-2015   #33
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,191
Default Re: Whats Next?

Going back to the dyno soon
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 08-12-2015   #34
batchman
 
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
Default Re: Whats Next?

Quote:
Originally Posted by Paul Workman View Post
But, to others, myself included, a rough-idling, over-heating in traffic, often stalling beast with high stall rpm converters, or no off-idle torque...is no fun to drive
I LOL'ed on that one, since I've taken the ZR-1 apart for revision 3 suspension I've been autocrossing friends' "C Prepared" cars. Change "traffic" to "grid" and you've got these cars nailed. Except that for the minute you're driving them - when they are an absolute laugh riot.

And just so you know I'm not poking you Paul, on the street I could not imagine anything of the sort...

Honestly the car reminded me very much of the ZR-1 on a 1st gear parking lot course. I now see why the SCCA rules guys were focused on making sure you could not put an automatic behind a ZR-1 within the rules when I asked them to combine all C4's (so I could use the quick rack).

Later,
- Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's
DRM chip/Watson/Borla/lid/LW batt&headlights,
springs, shocks, pads & lines, quick rack & Turn One,
camber brace, 32/22mm sways, A/C halfway deleted
17x11 & 12 CCW's, 315 & 335 Hoosier A6s

[/I]
batchman is offline   Reply With Quote
Old 08-12-2015   #35
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,132
Default Re: Whats Next?

Quote:
Whats Next?
Finish the 91 or the Callaway
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020