Parting out 1991 ZR-1 - ZR-1 Net Registry Forums

Polo-1 · 07-06-2008

Here is a small list. Ask if you need something that not listed yet. Motor and Trans are gone.

1991 ZR-1 LT5 Parts List Car was Red/Red with 61 k on it

Rear view Mirror $25-Goldcylon
Engine oil cooler…$25 -63vettezo6
Engine oil cooler hose….$150-Goldcylon
Air Cleaner Assembly with K&N..$65-Chris
Complete Dana 44 Conversion Kit…..$1800
Front Left sideTurn #16514491….$15-Goldcylon
Front Right side Turn#16514492….$15-Goldcylon
Rear side marker right#16508520..$15-Goldcylon
Rear side marker left#16508519..$15-Goldcylon
Front Fog/Turn left….$45
Front Fog/Turn right…$45
Reverse lights pair ………$25
Horns…..$15
A/C blend door#10158085….$10
Blower Motor……$15
Blower housing under dash…$40
Blower housing #52450785 engine side….$200 both parts-63vettezo6
Left and Right Gills panels……$40-DMark
Hood Latches……$25-1991ZR1
Hood Latch cables..$25
Accelerator pedal…..$20
Accelerator/cruise cables…….$25
Emergency Brake handle ……..$25
FX3 shock controller rear set…..$60-Chris
FX3 shock controller front set…….$60-kabnvtt
Rear shock pair…….$75-63vettezo6
FX3 seat switches…..$30-Goldcylon
FX3 computer…….$50-1991ZR1
Front shock pair(New)…..$150-63vettezo6
Upper Rad shroud(with stickers)…$50-63vettezo6
Coolant over flow……$10-dbriana
Vacuum ball….$5
Fan Assembly………..$75-Chris
Lower Rad shroud…..$10
Wiper motor……$10-xlr8nflorida
Front impact bumper………..$40
Rear Impact bumper (ZR1)……$75-Chris maybe
Rear bumper (no light/moldings)….$500-63vettez06
Master Brake cyl…………..$50
Battery tray………..$10
Upper coolant reservoir…..$15-dbriana
Clutch/brake pedals…..$15-Gustav(brake)
Cruise control bracket…..$10
Air pump Smog stuff…….$25-xlr8nflorida
Left head light assembly (w/motor)..$50-1991ZR1
Right head light assembly (w/motor)..$50-1991ZR1
Driver side mirror…$45
Passenger side mirror…$45-jerrydirks
Gas tank…..$25-Chris
Evap canister&lines….$25
Borla 2.5 (mid pipes gone)….$200-Chris
ECM bracket (small crack)….$5
Spare Tire Bag(bad zipper)….$25
Spare tire…………$25
Glove box tray(dash)…$5
Glove box door(dash)…$10-dbriana
Head Light module….$40-1991ZR1
Inside wire harness (from dash/fuse boxes 2/relays/FX3/doors/seats/ABS/tail lamps) this was $1147 new from GM no longer…..$400
A/C dash vents………$5 ea.-dbriana (left side only)-xlr8nflorida the rest of dash vents
Rear tail lights w housings …..$30-xlr8nflorida
Instrument panel (Canadian)…..$350
Head light switch…….$25
DIC panel……….$20-xlr8nflorida
Bose/CD and module ( unknown cond.)….. $75-webruke
A pillar moldings……$5ea
Power key switch/and bezel ( switch and bezel are epoxy together it works)…..$25-Goldcylon
Brake Booster ZR-1/PBR ( gone from GM)..$200
Rear cargo moldings ……..$5ea-dbriana (right side only)
Fuel door assembly…..$25-Falconfling
Steering wheel (no air bag)…$50-Ifogot who
Turn signal/wiper/cruise switch…$40 Jarvis
Seats w motors and rails (no rips)..$500 falconfling

The prices do not include shipping, I only charge what the shipping is( no extra ). So if you call it here it's yours.

Please keep it out here what you want, Im getting PMed crazy.
We can PM shipping and payment info.

Thanks Kevin

1991ZR1 · 07-06-2008

I'm interested in the following

Hood latches
FX3 computer
Left headlight assembly
Right headlight assembly
Headlight module
Power key switch and bezel

Sending you a PM

Zr1 Destroyer · 07-06-2008

If the passenger side is considered the left side I'll take the left side headlight assembly w/motor!

GOLDCYLON · 07-06-2008

I posted on the other forum at 156 pm as well and also sent you a PM

Ill take the switch and bezel ( Does it have a key?)

Also I want both the front left and right side marker lights

Also the rear side marker lights both sides

Does the FX3 switch include the harness

Please LMK Daryll

GOLDCYLON · 07-06-2008

Also can you send me a pic of the upper radiator shroud with stickers

goldcylon@cox.net

Thanks Daryll

Polo-1 · 07-06-2008

Lets see if this works, for pictures.

http://s7.photobucket.com/albums/y29...20ZR1%20Parts/

GOLDCYLON · 07-06-2008

Works great polo. Ill stick with what I have listed do you take Paypal? Daryll

Ill take the switch and bezel ( Does it have a key?)

Also I want both the front left and right side marker turn signal lights

Also the rear side marker lights both sides

Does the FX3 switch include the harness

Polo-1 · 07-06-2008

Quote:

Originally Posted by 1991ZR1

I'm interested in the following

Hood latches
FX3 computer
Left headlight assembly
Right headlight assembly
Headlight module
Power key switch and bezel

Sending you a PM

Daryll, I think 1991 ZR1 is 1st on the power key/Bezel and head light assemblies.
You are 1st for FX3/seat switches and harness not cut. and all side markers.

NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....

GOLDCYLON · 07-06-2008

Quote:

Originally Posted by Polo-1

Daryll, I think 1991 ZR1 is 1st on the power key/Bezel and head light assemblies.
You are 1st for FX3/seat switches and harness not cut. and all side markers.

NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....

Kevin Im not going to argue But I was the first on the other forum to post in both the for sale section and the ZR-1 section for the parts I requested. Whatever you think is fair if the your telling me only the front and rear side markers and the FX-3 and seat switches with harness is availalbe I can live with that too bro. Send me a total and a paypal address. IF you deem Im worthy for the switch I will take that too. To make this clean LMK. Daryll

http://forums.*************.com/show...post1566196278

First to Post with the same list

http://forums.*************.com/show....php?t=2071343

First to post again about the same list

GOLDCYLON · 07-06-2008

Quote:

Originally Posted by Polo-1

NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....

LOL ok I will I think I owe him a beer or too as well What will you need for shipping

Im at $90 for the front and rear side marker lights and the FX3 switches with harness. I do not want the radiator shroud. Maybe the oil cooler lines if they are still available? Is the radio bezel surround avail

Does the AC condensor come with all the ac lines as picd?

07-06-2008	#2
1991ZR1 Join Date: Sep 2005 Posts: 90	Re: Parting out 1991 ZR-1 I'm interested in the following Hood latches FX3 computer Left headlight assembly Right headlight assembly Headlight module Power key switch and bezel Sending you a PM

07-06-2008	#3
Zr1 Destroyer Join Date: Oct 2005 Location: Candy Apple...yUmMy Posts: 1,137	Re: Parting out 1991 ZR-1 If the passenger side is considered the left side I'll take the left side headlight assembly w/motor!

07-06-2008	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Parting out 1991 ZR-1 I posted on the other forum at 156 pm as well and also sent you a PM Ill take the switch and bezel ( Does it have a key?) Also I want both the front left and right side marker lights Also the rear side marker lights both sides Does the FX3 switch include the harness Please LMK Daryll __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

07-06-2008	#6
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: Parting out 1991 ZR-1 Lets see if this works, for pictures. http://s7.photobucket.com/albums/y29...20ZR1%20Parts/

07-06-2008	#7
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Parting out 1991 ZR-1 Works great polo. Ill stick with what I have listed do you take Paypal? Daryll Ill take the switch and bezel ( Does it have a key?) Also I want both the front left and right side marker turn signal lights Also the rear side marker lights both sides Does the FX3 switch include the harness __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

07-06-2008	#1
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Parting out 1991 ZR-1 Here is a small list. Ask if you need something that not listed yet. Motor and Trans are gone. 1991 ZR-1 LT5 Parts List Car was Red/Red with 61 k on it Rear view Mirror $25-Goldcylon Engine oil cooler…$25 -63vettezo6 Engine oil cooler hose….$150-Goldcylon Air Cleaner Assembly with K&N..$65-Chris Complete Dana 44 Conversion Kit…..$1800 Front Left sideTurn #16514491….$15-Goldcylon Front Right side Turn#16514492….$15-Goldcylon Rear side marker right#16508520..$15-Goldcylon Rear side marker left#16508519..$15-Goldcylon Front Fog/Turn left….$45 Front Fog/Turn right…$45 Reverse lights pair ………$25 Horns…..$15 A/C blend door#10158085….$10 Blower Motor……$15 Blower housing under dash…$40 Blower housing #52450785 engine side….$200 both parts-63vettezo6 Left and Right Gills panels……$40-DMark Hood Latches……$25-1991ZR1 Hood Latch cables..$25 Accelerator pedal…..$20 Accelerator/cruise cables…….$25 Emergency Brake handle ……..$25 FX3 shock controller rear set…..$60-Chris FX3 shock controller front set…….$60-kabnvtt Rear shock pair…….$75-63vettezo6 FX3 seat switches…..$30-Goldcylon FX3 computer…….$50-1991ZR1 Front shock pair(New)…..$150-63vettezo6 Upper Rad shroud(with stickers)…$50-63vettezo6 Coolant over flow……$10-dbriana Vacuum ball….$5 Fan Assembly………..$75-Chris Lower Rad shroud…..$10 Wiper motor……$10-xlr8nflorida Front impact bumper………..$40 Rear Impact bumper (ZR1)……$75-Chris maybe Rear bumper (no light/moldings)….$500-63vettez06 Master Brake cyl…………..$50 Battery tray………..$10 Upper coolant reservoir…..$15-dbriana Clutch/brake pedals…..$15-Gustav(brake) Cruise control bracket…..$10 Air pump Smog stuff…….$25-xlr8nflorida Left head light assembly (w/motor)..$50-1991ZR1 Right head light assembly (w/motor)..$50-1991ZR1 Driver side mirror…$45 Passenger side mirror…$45-jerrydirks Gas tank…..$25-Chris Evap canister&lines….$25 Borla 2.5 (mid pipes gone)….$200-Chris ECM bracket (small crack)….$5 Spare Tire Bag(bad zipper)….$25 Spare tire…………$25 Glove box tray(dash)…$5 Glove box door(dash)…$10-dbriana Head Light module….$40-1991ZR1 Inside wire harness (from dash/fuse boxes 2/relays/FX3/doors/seats/ABS/tail lamps) this was $1147 new from GM no longer…..$400 A/C dash vents………$5 ea.-dbriana (left side only)-xlr8nflorida the rest of dash vents Rear tail lights w housings …..$30-xlr8nflorida Instrument panel (Canadian)…..$350 Head light switch…….$25 DIC panel……….$20-xlr8nflorida Bose/CD and module ( unknown cond.)….. $75-webruke A pillar moldings……$5ea Power key switch/and bezel ( switch and bezel are epoxy together it works)…..$25-Goldcylon Brake Booster ZR-1/PBR ( gone from GM)..$200 Rear cargo moldings ……..$5ea-dbriana (right side only) Fuel door assembly…..$25-Falconfling Steering wheel (no air bag)…$50-Ifogot who Turn signal/wiper/cruise switch…$40 Jarvis Seats w motors and rails (no rips)..$500 falconfling The prices do not include shipping, I only charge what the shipping is( no extra ). So if you call it here it's yours. Please keep it out here what you want, Im getting PMed crazy. We can PM shipping and payment info. Thanks Kevin Last edited by Polo-1; 05-15-2011 at 04:56 PM.

07-06-2008	#5
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Parting out 1991 ZR-1 Also can you send me a pic of the upper radiator shroud with stickers goldcylon@cox.net Thanks Daryll __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V