|
|
|
11-03-2013
|
#1 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,450
|
Brake Pad suggestions
Looking for a pad a little more aggressive than stox pad, with not too much brake dust, wheels are stox, calipers are stox, just weekend driving and occasional drag, mile or road course racing, maybe a few times a year
|
|
|
|
11-03-2013
|
#2 |
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,593
|
Re: Brake Pad suggestions
Hawk HPS pads and a good flush & bleed of the
brake fluid will do the job |
|
|
|
|
11-03-2013
|
#3 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
Re: Brake Pad suggestions
Hawk HPS is what I use Phil. Very happy with em
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
11-03-2013
|
#4 |
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
|
Re: Brake Pad suggestions
Same...
__________________
Ron Hanselman Founding Member #80 CM Lifetime Member #1093 1991 #383 Twin Turbo 1993 #099 Ruby, Jeal 368 w/Snake Skinner body 1961 White with Red Int |
|
|
|
|
11-03-2013
|
#5 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Brake Pad suggestions
Happily running HPS on C5 calipers and rotors, but I will admit that they dust a lot. Still better than ceramics on the front and cracked rotors from too much heat.
|
|
|
|
|
11-03-2013
|
#6 |
 
Join Date: May 2008
Location: Okemos, MI.
Posts: 1,186
|
Re: Brake Pad suggestions
I used Hawks HPS pads on my '92 and thought they were real good for autocross and "aggressive" street use.
I will switch to them on my '95, when it is time to change.
__________________
Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium |
|
|
|
|
11-04-2013
|
#7 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,037
|
Re: Brake Pad suggestions
Im using Akebono pads,will never use anything else and 90% brake dust gone.As far as performance,they stop the car.
|
|
|
|
|
11-11-2013
|
#8 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,664
|
Re: Brake Pad suggestions
Quote:
What would u use for your Z06? The stock pads are horrid for dust. They stop fine but...
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
|
11-13-2013
|
#9 | |
|
Join Date: May 2008
Location: Okemos, MI.
Posts: 1,186
|
Re: Brake Pad suggestions
Quote:
With the first set, I tracked it once and autocrossed it a bunch. The second set went on around 30k or so. I haven't been driving it much the last few years, kids are getting older and my time is spent elsewhere. The dust doesn't bother me because typically after it is driven, it is washed, covered and put back in the garage. 
__________________
Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium |
|
|
|
|
|
04-16-2015
|
#10 |
Join Date: Jan 2012
Location: Florence, SC
Posts: 1,338
|
Re: Brake Pad suggestions
I know this threads a couple years old, cudos to the search function, but has anyone tried Hawks newer High Performance Street 5.0 or new for 2015 Street/Race pads? Both seem to perform as well if not better than the HPS's with less noise/dust, at least from Hawks description. I'm just looking to freshen up my stock brakes while I do a few other things to my 94. Got a set of Baer Decellerators on the way as well. Thanks for your input!
__________________
Jim Zorgias  1994 ZR-1 Admiral Blue/Black #245 1996 Callaway Supernatural 450 |
|
|
|
 |
|
|
Hybrid Mode
