Cam Sensor Questions - ZR-1 Net Registry Forums

-=Jeff=- · 02-28-2019

Few questions. Where do we buy the replacement now? Jerry?

Also for those of us who had a cam sensor failure what were the symptoms?

While I don't believe mine is having issues, I was looking into something else and was curious on these particular symptoms

any input?

THANKS

Young1 · 02-28-2019

Do a search. Plenty on here about. You will get a code 31 if I remember correctly. In my case it would intermittently just stop running! A member here builds a replacement sensor. I have the prototype and it has been fine for 18 months now. As you have discovered the cam position sensor is now NA.

Dynomite · 02-28-2019

Alternative Camshaft Position Sensor

-=Jeff=- · 02-28-2019

Dynomite.. end of that thread he says he turned it over to Jerry.. does anyone have a PN for Jerry's website. I cannot find it in a search..

GOLDCYLON · 03-07-2019

Quote:

Originally Posted by -=Jeff=-

Few questions. Where do we buy the replacement now? Jerry?

Also for those of us who had a cam sensor failure what were the symptoms?

While I don't believe mine is having issues, I was looking into something else and was curious on these particular symptoms

any input?

THANKS

-=JEFF=- all I had was a SES code 31 that would consistently set in the DIC. I replaced the sensor and the Code 31 went away. GC

Dynomite · 03-08-2019

Quote:

Originally Posted by GOLDCYLON

-=JEFF=- all I had was a SES code 31 that would consistently set in the DIC. I replaced the sensor and the Code 31 went away. GC

Is Jerry making the sensors or will Phil make some more sensors. For a week or so the sensors Phil Made sold like Hot Cakes

GOLDCYLON · 03-09-2019

Quote:

Originally Posted by Dynomite

Is Jerry making the sensors or will Phil make some more sensors. For a week or so the sensors Phil Made sold like Hot Cakes

No idea

-=Jeff=- · 03-09-2019

I think Phil will make one if needed..

Jetjock · 07-25-2019

I’m having a hard time getting the new cam sensor back in. Any tips on getting it back in. Also, what about the shield? Leave it or put it back on?

Thanks

Jagdpanzer · 07-26-2019

Rub a little motor oil on the bore entry in the head and on sensor o-ring and it should push right in with a slight twist. Shield should be put back on again.

Sent from my iPhone using ZR-1 Net Registry

02-28-2019	#1
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,137	Cam Sensor Questions Few questions. Where do we buy the replacement now? Jerry? Also for those of us who had a cam sensor failure what were the symptoms? While I don't believe mine is having issues, I was looking into something else and was curious on these particular symptoms any input? THANKS __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

02-28-2019	#2
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 880	Re: Cam Sensor Questions Do a search. Plenty on here about. You will get a code 31 if I remember correctly. In my case it would intermittently just stop running! A member here builds a replacement sensor. I have the prototype and it has been fine for 18 months now. As you have discovered the cam position sensor is now NA. __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

02-28-2019	#3
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,788	Re: Cam Sensor Questions Alternative Camshaft Position Sensor __________________ Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS

02-28-2019	#4
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,137	Re: Cam Sensor Questions Dynomite.. end of that thread he says he turned it over to Jerry.. does anyone have a PN for Jerry's website. I cannot find it in a search.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

03-09-2019	#8
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,137	Re: Cam Sensor Questions I think Phil will make one if needed.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-25-2019	#9
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 546	Re: Cam Sensor Questions I’m having a hard time getting the new cam sensor back in. Any tips on getting it back in. Also, what about the shield? Leave it or put it back on? Thanks __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

07-26-2019	#10
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,647	Re: Cam Sensor Questions Rub a little motor oil on the bore entry in the head and on sensor o-ring and it should push right in with a slight twist. Shield should be put back on again. Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake