Trans Seal - ZR-1 Net Registry Forums

32valvZ · 03-30-2019

Since Im getting a new exhaust system, thought Id fix the leaky rear seal on the ZF. Anything else I should do at this point? I see what looks like sealer under the lip of the seal.. should I use something for the new one in that location also?

Ccmano · 03-30-2019

If you don’t already have one, now would be the time to do a Hurst or ZFDoc shifter. I wouldn’t own a Z without one. Replace the seal, their cheap.
H

32valvZ · 03-30-2019

Already have Bills short throw shifter.... In fact, my whole transmission has been built by him. Im sort of surprised the rear seal is leaking. No grooves in the yoke either... Not sure why its leaking, but it is.

Anyone have a part number for the seal?
Do I put sealer under the lip of the seal??

akool64 · 03-30-2019

National P/N 4333N. Sealant not necessary.

32valvZ · 03-30-2019

Quote:

Originally Posted by akool64

National P/N 4333N. Sealant not necessary.

I was able to get a NAPA seal locally Part # 18992 SKF Brand Made in USA $9.75

WARP TEN · 03-31-2019

Quote:

Originally Posted by 32valvZ

Already have Bills short throw shifter.... In fact, my whole transmission has been built by him. Im sort of surprised the rear seal is leaking. No grooves in the yoke either... Not sure why its leaking, but it is.

Anyone have a part number for the seal?
Do I put sealer under the lip of the seal??

You might chat with Bill about it to get his thoughts on why it is leaking and best solutions. But the above suggestions are certainly correct.--Bob

32valvZ · 03-31-2019

Quote:

Originally Posted by WARP TEN

You might chat with Bill about it to get his thoughts on why it is leaking and best solutions. But the above suggestions are certainly correct.--Bob

I was going to call him.... I felt funny doing so though for 2 reasons.... One, the previous owner was the one who had the trans rebuilt with him, and second, because this is a fairly menial issue that I really didnt want to bug the man about.

A couple of things,,, the yoke is pretty much brand new, the P.O. replaced it. It looks perfect, no grooves, nothing at all, mirror finish.

The leak wasnt terrible... a drop on the garage floor after sitting for a month or more...

Im on the O.C.D. side when it comes to my cars leaking... I HATE it!! So, being a pretty simple job and very inexpensive.... why not?

Plus... cant have a 10 dollar seal dripping onto a 1000 dollar exhaust system now can I??

A26B · 03-31-2019

Make sure not overfilled first

Sent from my iPhone using ZR-1 Net Registry

32valvZ · 04-01-2019

Quote:

Originally Posted by A26B

Make sure not overfilled first

Sent from my iPhone using ZR-1 Net Registry

I did check the level, right at the bottom of the fill hole...

I got the seal installed no problem.... Should be fine.

03-30-2019	#2
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Trans Seal If you don’t already have one, now would be the time to do a Hurst or ZFDoc shifter. I wouldn’t own a Z without one. Replace the seal, their cheap. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

03-30-2019	#3
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Re: Trans Seal Already have Bills short throw shifter.... In fact, my whole transmission has been built by him. Im sort of surprised the rear seal is leaking. No grooves in the yoke either... Not sure why its leaking, but it is. Anyone have a part number for the seal? Do I put sealer under the lip of the seal?? __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

03-30-2019	#4
akool64 Join Date: Jun 2018 Location: Owasso, OK Posts: 6	Re: Trans Seal National P/N 4333N. Sealant not necessary.

03-31-2019	#8
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,373	Re: Trans Seal Make sure not overfilled first Sent from my iPhone using ZR-1 Net Registry __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.