Delamination Poll - Page 8 - ZR-1 Net Registry Forums

dredgeguy · 03-08-2019

My 92 had delamination around the edges, not too bad. Replaced it after a stone put a crack in it with one of the $2500 ZR-1 aftermarket replacements with the cutout. Insurance paid for it after a 2 month battle of explaining that they have to replace factory spec if available and yes it is aftermarket, not OEM. If OEM they wanted me to pay the difference but I was able to prove that this is what they had to provide.

Vette73 · 03-08-2019

Isn't it true that an original ZR-1 windshield can cost upwards of $ 3,000 dollars? My 91 came with a replacement windshield...

dredgeguy · 03-08-2019

I do not believe any original ZR-1 windshields are available but there is aftermarket clone with the correct cutout available at a cost of around $2500. A regular C4 windshield which will also fit but without the cutout is less than $500

Paul Workman · 03-08-2019

Upon replacing my WS, I found many places that were willing to make the attempt on my C4. But, don't be surprised when they find out it is a C4 Corvette; many WS installation sources will not do a C4 (I found).

Safelite installed my (standard C4) WS, but I had to goto a specific (brick and mortar) location where a person experienced with C4s was located and would do the job.

tgonyaw · 03-10-2019

I have a 1991 with delamination. About an inch coming from the edges. Passed Virgina Safety Inspection ok last fall.
Will leave as is if it stays contained.

rossgn49u · 03-11-2019

94 has substantial delam. Sold a 91 last year with the same. New owner replaced with a standard C4 windshield.

Sent from my SM-G930V using ZR-1 Net Registry mobile app

lfalzarano · 10-08-2019

Thanks for sharing. What were the pieces you couldn’t locate for the replacement?

Sent from my iPhone using ZR-1 Net Registry

Z51JEFF · 10-08-2019

Quote:

Originally Posted by lfalzarano

Thanks for sharing. What were the pieces you couldn’t locate for the replacement?

Sent from my iPhone using ZR-1 Net Registry

Most likely these were to 3 pieces of exposed trim going around the WS. At one point I bought all 3 piece,almost $900, for the 3 pieces and 2 of the 3 were of such poor quality I got a refund on them but still have one side piece somewhere. It’s very difficult to get this aluminum trim off the car without destroying it but it is possible.

HAWAIIZR-1 · 10-09-2019

Quote:

Originally Posted by lfalzarano

Thanks for sharing. What were the pieces you couldn’t locate for the replacement?

Sent from my iPhone using ZR-1 Net Registry

You’re welcome. Yes, just as Jeff said it was those three pieces of metal trim around the windshield. I was not able to find new and mine were perfect so I just told the installers to carefully replace. They did a great job in saving it and reusing.
IMG_4830.JPG

Sent from my iPhone using ZR-1 Net Registry

lfalzarano · 10-09-2019

Wow! Awesome not seeing that delamination!

Sent from my iPhone using ZR-1 Net Registry

View Poll Results: Delamination Poll
I have a 1990 with NO delamination	81	21.49%
I have a 1990 with delamination	60	15.92%
I have a 1991 with NO delamination	25	6.63%
I have a 1991 with delamination	84	22.28%
I have a 1992 with NO delamination	6	1.59%
I have a 1992 with delamination	28	7.43%
I have a 1993 with NO delamination	5	1.33%
I have a 1993 with delamination	21	5.57%
I have a 1994 with NO delamination	6	1.59%
I have a 1994 with delamination	24	6.37%
I have a 1995 with NO delamination	7	1.86%
I have a 1995 with delamination	30	7.96%
Voters: 377. You may not vote on this poll

03-08-2019	#71
dredgeguy Join Date: Aug 2012 Location: Ellicott City, MD Posts: 1,636	Re: Delamination Poll My 92 had delamination around the edges, not too bad. Replaced it after a stone put a crack in it with one of the $2500 ZR-1 aftermarket replacements with the cutout. Insurance paid for it after a 2 month battle of explaining that they have to replace factory spec if available and yes it is aftermarket, not OEM. If OEM they wanted me to pay the difference but I was able to prove that this is what they had to provide. __________________ Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa

03-08-2019	#72
Vette73 Join Date: Nov 2014 Location: Brooklyn ny Posts: 1,045	Re: Delamination Poll Isn't it true that an original ZR-1 windshield can cost upwards of $ 3,000 dollars? My 91 came with a replacement windshield...

03-08-2019	#73
dredgeguy Join Date: Aug 2012 Location: Ellicott City, MD Posts: 1,636	Re: Delamination Poll I do not believe any original ZR-1 windshields are available but there is aftermarket clone with the correct cutout available at a cost of around $2500. A regular C4 windshield which will also fit but without the cutout is less than $500 __________________ Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa

03-08-2019	#74
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Delamination Poll Upon replacing my WS, I found many places that were willing to make the attempt on my C4. But, don't be surprised when they find out it is a C4 Corvette; many WS installation sources will not do a C4 (I found). Safelite installed my (standard C4) WS, but I had to goto a specific (brick and mortar) location where a person experienced with C4s was located and would do the job. __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

03-10-2019	#75
tgonyaw Join Date: May 2018 Location: VA Posts: 191	Re: Delamination Poll I have a 1991 with delamination. About an inch coming from the edges. Passed Virgina Safety Inspection ok last fall. Will leave as is if it stays contained.

03-11-2019	#76
rossgn49u Join Date: Apr 2018 Location: Lone Star State Posts: 98	Re: Delamination Poll 94 has substantial delam. Sold a 91 last year with the same. New owner replaced with a standard C4 windshield. Sent from my SM-G930V using ZR-1 Net Registry mobile app __________________ Ross Lone Star State 94 ZR-1 #293

10-08-2019	#77
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Delamination Poll Thanks for sharing. What were the pieces you couldn’t locate for the replacement? Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

10-09-2019	#80
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Delamination Poll Wow! Awesome not seeing that delamination! Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]