Jumper to avoid being stranded with a failed Primary Fuel Pump - Page 7 - ZR-1 Net Registry Forums

Scrrem · 05-31-2015

Can I get one as well?
Rich

GOLDCYLON · 06-01-2015

OK 5 total for lot 2 .

GOLDCYLON · 06-01-2015

OK Update... Prototype of the Limp Home Jumper is Complete. Each jumper is 7.5 Inches long with straight wire strands end to end and heat shrink wrapped. Should hold up for those limp home events. I will pick up the first 10 units this thursday.

In position on Test Vett

We Gone · 06-01-2015

Nice job, PM the payment method.

GOLDCYLON · 06-01-2015

Ok I will send out the first order of ten on friday. I will accept Cash, Personal Checks or Paypal. If you use Paypal sorry you have to pay the extra 2.9% plus .30 per transaction. I wont be accepting paypal gifts bcause if I get too many of those, paypal gets annoyed and shuts you down unless you become a merchant. I am not a merchant and at the $30 shipped price point lower 48 my buddy that did ALL the work needs to eat.

So if you choose to do the paypal method the cost is $31.17

Thats $30 + 2.9% = 30.87 plus .30 = $31.17

My Paypal address is goldcylon@cox.net

My shipping address is Daryll Fust, 9219 West Avenida Del Sol, Peoria, AZ 85383.

So....

In order of interest (Kind of).

1. GOLDCYLON Mines going to JIM VOTER free since it was his idea
2. PHILLIPSLT5 Will be hand delivered along with a cold one
3. GEEZER (Canada) Paid
4. ZR1North (Canada) Paid
5. GSJOE X 2 Paid
6. CHRISKINZEL Paid
7. CVETTE98PACECAR X2 Not Paid
8. DYNOMITE X4 Paid
9. NELSON007 X2
10. WEGONE Paid by Check no funds received yet

The first order of ten will go to 1,2,3,4,5,6,7 and 10. Cliff and Nelson (8&9) will be the first of the next batch.

Jim I will need your address

QB93Z · 06-01-2015

PM sent with my address.

Jim

ZR1North · 06-01-2015

2 PMs sent, Daryll.

Thanks again for doing this.

Bob

Dynomite · 06-01-2015

Daryll......I sent $124.68 to your Paypal for four of the Jumpers.....if the .30 is per transaction......keep the change

Send to my CA address....as I just got back earlier today from SD

And....that is a very nice assembly you have there and you proof tested

A BIG thanks to Jim Voter for his creativity

Quote:

Originally Posted by GOLDCYLON

Ok I will send out the first order of ten on friday. I will accept Cash, Personal Checks or Paypal. If you use Paypal sorry you have to pay the extra 2.9% plus .30 per transaction. I wont be accepting paypal gifts bcause if I get too many of those, paypal gets annoyed and shuts you down unless you become a merchant. I am not a merchant and at the $30 shipped price point my buddy that did ALL the work needs to eat.

So if you choose to do the paypal method the cost is $31.17

The first order of ten will go to 1,2,3,4,5,6,7 and 10. Cliff and Nelson (8&9) will be the first of the next batch.

George Maz · 06-01-2015

PayPal sent ($32)
Thank you Daryll for putting this all together.
Thanks to EDRAM454 for alerting me to this solution.

hiperf406 · 06-02-2015

Daryll can I get one also, I'll see if `PhillipLT5 will pick it up from you & old it for me till I get down in the Fall. Thank you for spearheading geting these built & to QB93Z for coming up with the bypass design .

lorne #1748
Stock except for Corsa
butchered exhaust.

05-31-2015	#61
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,469	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump Can I get one as well? Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

06-01-2015	#62
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump OK 5 total for lot 2 . __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-01-2015	#63
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump OK Update... Prototype of the Limp Home Jumper is Complete. Each jumper is 7.5 Inches long with straight wire strands end to end and heat shrink wrapped. Should hold up for those limp home events. I will pick up the first 10 units this thursday. In position on Test Vett __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 06-01-2015 at 03:12 PM.

06-01-2015	#64
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,162	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump Nice job, PM the payment method. __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold

06-01-2015	#65
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump Ok I will send out the first order of ten on friday. I will accept Cash, Personal Checks or Paypal. If you use Paypal sorry you have to pay the extra 2.9% plus .30 per transaction. I wont be accepting paypal gifts bcause if I get too many of those, paypal gets annoyed and shuts you down unless you become a merchant. I am not a merchant and at the $30 shipped price point lower 48 my buddy that did ALL the work needs to eat. So if you choose to do the paypal method the cost is $31.17 Thats $30 + 2.9% = 30.87 plus .30 = $31.17 My Paypal address is goldcylon@cox.net My shipping address is Daryll Fust, 9219 West Avenida Del Sol, Peoria, AZ 85383. So.... In order of interest (Kind of). 1. GOLDCYLON Mines going to JIM VOTER free since it was his idea 2. PHILLIPSLT5 Will be hand delivered along with a cold one 3. GEEZER (Canada) Paid 4. ZR1North (Canada) Paid 5. GSJOE X 2 Paid 6. CHRISKINZEL Paid 7. CVETTE98PACECAR X2 Not Paid 8. DYNOMITE X4 Paid 9. NELSON007 X2 10. WEGONE Paid by Check no funds received yet The first order of ten will go to 1,2,3,4,5,6,7 and 10. Cliff and Nelson (8&9) will be the first of the next batch. Jim I will need your address __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 06-04-2015 at 06:27 PM.

06-01-2015	#66
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,687	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump PM sent with my address. Jim

06-01-2015	#67
ZR1North Join Date: Feb 2007 Location: Ann Arbor, Michigan Posts: 562	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump 2 PMs sent, Daryll. Thanks again for doing this. Bob

06-01-2015	#69
George Maz Join Date: Dec 2014 Location: Long Island, NY Posts: 295	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump PayPal sent ($32) Thank you Daryll for putting this all together. Thanks to EDRAM454 for alerting me to this solution. __________________ 1990 ZR-1 #1587 1990 ZR-1 #1727

06-02-2015	#70
hiperf406 Join Date: Apr 2007 Location: Spruce Grove Oilberta/In Mex for winter Posts: 1,046	Re: Jumper to avoid being stranded with a failed Primary Fuel Pump Daryll can I get one also, I'll see if `PhillipLT5 will pick it up from you & old it for me till I get down in the Fall. Thank you for spearheading geting these built & to QB93Z for coming up with the bypass design . lorne #1748 Stock except for Corsa butchered exhaust. __________________ lorne # 1748 Stock except for a modified Corsa exhaust. When the flag drops the bull sh1t stops! Last edited by hiperf406; 06-02-2015 at 07:09 PM.