Installing accel injectors....a coupe questions - Page 2 - ZR-1 Net Registry Forums

Pete · 11-24-2018

Leave the primary o-rings in the IH'S that's what seals the injectors, on the injector body.
DO NOT REMOVE primary O-rings from injector housing's,unless you're replacing them with new ones.

You can remove the lower o-rings on the primary injectors from the injectors but do not remove o-rings from the primary Injector Housings.

You will have big vacuum leak.

Pete

Quote:

Originally Posted by zr1assassin

Ok. I'm assuming you take them out of the housing and put them on the injector to install? It wont slide in and out like the stock injectors because of that lip on the accels

zr1assassin · 11-24-2018

Quote:

Originally Posted by Pete

Leave the primary o-rings in the IH'S that's what seals the injectors, on the injector body.
DO NOT REMOVE primary O-rings from injector housing's,unless you're replacing them with new ones.

You can remove the lower o-rings on the primary injectors from the injectors but do not remove o-rings from the primary Injector Housings.

You will have big vacuum leak.

Pete

So no problem pushing the tip down into there? It's got a bigger diameter lip on it than the stock injectors

how to buy a car without title in texas

Ccmano · 11-24-2018

They seal higher up on the injector. The bottom makes no difference.
H
: cheers:

zr1assassin · 11-25-2018

Quote:

Originally Posted by Ccmano

They seal higher up on the injector. The bottom makes no difference.
H
: cheers:

But pushing the bottom down in through the oring does, it's a bigger diameter than the stock injectors (see picture).

zr1assassin · 11-25-2018

I'll try it tomorrow, hopefully it pops right in. I will update with results

Ccmano · 11-25-2018

Quote:

Originally Posted by zr1assassin

I'll try it tomorrow, hopefully it pops right in. I will update with results

The hole is still larger than the bottom of the injector. You’ll see.
H

zr1assassin · 11-26-2018

Quote:

Originally Posted by Ccmano

The hole is still larger than the bottom of the injector. You’ll see.
H

Alright boys they're back in, and yes ccmano I seen what you were talking about, the hole is bigger than the tip and it seals on the body not the end 😉

11-24-2018	#13
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Installing accel injectors....a coupe questions They seal higher up on the injector. The bottom makes no difference. H : cheers: __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

11-25-2018	#15
zr1assassin Join Date: May 2012 Location: saint joseph mo Posts: 465	Re: Installing accel injectors....a coupe questions I'll try it tomorrow, hopefully it pops right in. I will update with results