saying hello - Page 2 - ZR-1 Net Registry Forums

Bearly Flying · 06-04-2014

"if it has tyers or .... it's gonna cost you money"

Kevin, I think my browser misplaced a few letters, "If it has tyres or....... WHAT....... ?

WB9MCW · 06-04-2014

Hi WB and welcome to the ZOO.
Congrats on the 94 and good luck on getting your Z back on track performance wise.

Paul Workman · 06-05-2014

Welcome to the Brotherhood of the Beast!

Some plastic tubing and some check valves and a couple actuators. Not much to it, really. If you need anything, I have most ALL of my secondary stuff that you're welcome to if you need a part or two.

Paul

weldbead · 06-10-2014

thanks for the kind offer of parts..
im at an impasse now..gotta watch the haibeck video a time or two more to get comfortable with the idea of removing the
plenum and fixing the problem..other part of the impasse is once im in there do i fix it or tear it out?
i am no purist..just want a good pull when i step down..which is makin me tend toward the tear it out solution..

KILLSHOTS · 06-10-2014

Quote:

Originally Posted by weldbead

thanks for the kind offer of parts..
im at an impasse now..gotta watch the haibeck video a time or two more to get comfortable with the idea of removing the
plenum and fixing the problem..other part of the impasse is once im in there do i fix it or tear it out?
i am no purist..just want a good pull when i step down..which is makin me tend toward the tear it out solution..

Check out the thread I recently started on secondaries. Paul and a bunch of other guys give some compelling reasons for just removing the system altogether. Good luck!

GOLDCYLON · 06-10-2014

Welcome aboard

Schrade · 06-10-2014

Quote:

Originally Posted by weldbead

thanks for the kind offer of parts..
im at an impasse now..gotta watch the haibeck video a time or two more to get comfortable with the idea of removing the
plenum and fixing the problem..other part of the impasse is once im in there do i fix it or tear it out?
i am no purist..just want a good pull when i step down..which is makin me tend toward the tear it out solution..

Over 50 pages of snappics of plenum pull in sig-link below...

Jagdpanzer · 06-10-2014

Welcome to our illustrious group.
Nice to see another torch red/grey 94 amongst us.
Suggest you hold off on pulling the secondaries. Very easy to fix the issues you have now. Then drive it for awhile and see what you think.

ZZZZZR1 · 06-10-2014

Quote:

Originally Posted by weldbead

Hello..been hanging out here for a month or so, havent said hello because i couldnt get camera to work..its not workin great but heres my zr1..1994 # 213..had him 2 months..my 4 year old grandson and i call him mcqueen..im pretty sure he needs a little work under the plenum..his secondaries open but seems like they close, its hard for him to get past 5k..pump runs all the time with the key on..i got fsm's, just got mark haibecks under the plenum video..

Welcome!!!

Thanks for posting pictures

I have 1994 #150 made a few weeks from yours!

Hope to see you @ Corvettes of Carlisle in August

David

ghlkal · 06-10-2014

Welcome aboard.

Quote:

Originally Posted by weldbead

gotta watch the haibeck video a time or two more to get comfortable with the idea of removing the
plenum and fixing the problem

It seems a little daunting before you do it the first time, but you'll be able to do it!

Let us know how it goes.

06-04-2014	#11
Bearly Flying Join Date: Dec 2012 Location: Ponoka, Alberta, Canada Posts: 158	Re: saying hello "if it has tyers or .... it's gonna cost you money" Kevin, I think my browser misplaced a few letters, "If it has tyres or....... WHAT....... ? __________________ 91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes

06-04-2014	#12
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: saying hello Hi WB and welcome to the ZOO. Congrats on the 94 and good luck on getting your Z back on track performance wise. __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

06-05-2014	#13
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: saying hello Welcome to the Brotherhood of the Beast! Some plastic tubing and some check valves and a couple actuators. Not much to it, really. If you need anything, I have most ALL of my secondary stuff that you're welcome to if you need a part or two. Paul __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

06-10-2014	#14
weldbead Join Date: Apr 2014 Location: poughkeepsie ny Posts: 33	Re: saying hello thanks for the kind offer of parts.. im at an impasse now..gotta watch the haibeck video a time or two more to get comfortable with the idea of removing the plenum and fixing the problem..other part of the impasse is once im in there do i fix it or tear it out? i am no purist..just want a good pull when i step down..which is makin me tend toward the tear it out solution..

06-10-2014	#16
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: saying hello Welcome aboard __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-10-2014	#18
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,647	Re: saying hello Welcome to our illustrious group. Nice to see another torch red/grey 94 amongst us. Suggest you hold off on pulling the secondaries. Very easy to fix the issues you have now. Then drive it for awhile and see what you think. __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake