![]() |
#1 |
![]() Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,536
|
![]()
Hi everyone,
I've removed the plenum to switch out the starter motor and there's a lot of thick black grime underneath. Any suggestions for the best way of cleaning there? ![]() Also, this plastic clip crumbled when I moved one of the lines. Are they available anywhere? ![]() Thanks Dave
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,707
|
![]()
I use mineral spirit, a toothbrush and a lot of rags. Once cleaned, fresh injector housing gasket and positive seal at PVC hoses should keep it reasonably clean.
|
![]() |
![]() |
![]() |
#3 | |
![]() Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,536
|
![]() Quote:
![]()
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 880
|
![]()
Put duct tape over intake ports to prevent anything falling in there. Don?t have an oops.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,536
|
![]()
Thanks, Steve. I did that a couple of minutes after taking the photo
![]()
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
![]() |
![]() |
![]() |
#6 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,049
|
![]()
I'd suggest if you're not in a hurry to get it back together pull everything out off,clean and put it back together.
|
![]() |
![]() |
![]() |
|
|