Wilwood Brake question - Page 2 - ZR-1 Net Registry Forums

GOLDCYLON · 03-15-2023

Jay the 6 piston narrowites will fit under the 17 inch Sawblades, 17 inch A molds and the 17 inch Fikse FM-5s

JT ZR-Won · 03-15-2023

Quote:

Originally Posted by GOLDCYLON

Jay the 6 piston narrowites will fit under the 17 inch Sawblades, 17 inch A molds and the 17 inch Fikse FM-5s

That's good to know... I'm assuming the Dymags as well. I'm really concerned about them clearing the rear Dymags

-=Jeff=- · 03-15-2023

Quote:

Originally Posted by JT ZR-Won

ps... my Dad told me to tell you hello!

Jay

Same back to him, I should email him, but it would take him a week to type out the reply.. LOL

Quote:

Originally Posted by JT ZR-Won

That's good to know... I'm assuming the Dymags as well. I'm really concerned about them clearing the rear Dymags

They should, the rears are smaller than the front. I don't see any issues with the Wilwoods not working with Dymags

GOLDCYLON · 03-16-2023

Quote:

Originally Posted by JT ZR-Won

That's good to know... I'm assuming the Dymags as well. I'm really concerned about them clearing the rear Dymags

I am not sure on the Dymags TBH. I was the Guinea pig for the the FIKSE FM-5s.

I bought my fronts used on Craigslist when a gent sold his 94 corvette and he was rocking that setup behind sawblades.

I had to pay full boat for the 4 piston rear Wilwoods. Not cheap but plenty of room in the rears.

JT ZR-Won · 03-16-2023

That's great, thanks for the info!

Quote:

Originally Posted by GOLDCYLON

I am not sure on the Dymags TBH. I was the Guinea pig for the the FIKSE FM-5s.

I bought my fronts used on Craigslist when a gent sold his 94 corvette and he was rocking that setup behind sawblades.

I had to pay full boat for the 4 piston rear Wilwoods. Not cheap but plenty of room in the rears.

JT ZR-Won · 03-16-2023

Quote:

Originally Posted by -=Jeff=-

Same back to him, I should email him, but it would take him a week to type out the reply.. LOL

This is true! haha!

03-15-2023	#11
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	Re: Wilwood Brake question Jay the 6 piston narrowites will fit under the 17 inch Sawblades, 17 inch A molds and the 17 inch Fikse FM-5s __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V