Seat track stud twisted off 😫 - ZR-1 Net Registry Forums

Young1 · 11-03-2019

Driver side right rear seat track stud twisted off flush with carpet. Sheesh and I was only using a 3/8 ratchet with long extensions. No cheater bar even. Need suggestions for a repair. Don’t these things seem to happen when working on someone else’s car? And a Z undergoing NCRS certification too!

Paul Workman · 11-03-2019

Quote:

Originally Posted by Young1

Driver side right rear seat track stud twisted off flush with carpet. Sheesh and I was only using a 3/8 ratchet with long extensions. No cheater bar even. Need suggestions for a repair. Don’t these things seem to happen when working on someone else’s car? And a Z undergoing NCRS certification too!

Rusted...

Penetrating oil soak
Drill out the center of the bolt
"Easy-Out" tool.

My Easy-Outs came as a Craftsman set. But, Ace H/W does sell individual sizes, complete with the proper size drill bit contained in the package.

Demps · 11-03-2019

I’m sure you know this but for NCRS I’d be more concerned with the ‘head’ of the stud as it protrudes through the floorpan, is sealed with an epoxy-ish, & is painted over.

So, I have no good advice.

Ted

Mystic ZR-1 · 11-03-2019

Seriously doubt they‘d even notice?
If they did, 1 point?
I‘d be more concerned (but not much more...) about the
safety aspect of the seat not being fastened to the car correctly.
For looks, you could carefully epoxy the stud and nut you twisted off back in place.
I‘m sure, if, in the unlikely event they do look at it, they won‘t look too close?
So much for the safety aspect...

Young1 · 11-03-2019

Y’all think a hammer and punch will push it down thru the pan? No grinding required?

Paul Workman · 11-04-2019

Quote:

Originally Posted by Young1

Y’all think a hammer and punch will push it down thru the pan? No grinding required?

You're kidding, right?

11-03-2019	#1
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 879	Seat track stud twisted off 😫 Driver side right rear seat track stud twisted off flush with carpet. Sheesh and I was only using a 3/8 ratchet with long extensions. No cheater bar even. Need suggestions for a repair. Don’t these things seem to happen when working on someone else’s car? And a Z undergoing NCRS certification too! __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

11-03-2019	#3
Demps Join Date: Jan 2006 Location: Niceville Posts: 997	Re: Seat track stud twisted off 😫 I’m sure you know this but for NCRS I’d be more concerned with the ‘head’ of the stud as it protrudes through the floorpan, is sealed with an epoxy-ish, & is painted over. So, I have no good advice. Ted

11-03-2019	#4
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,602	Re: Seat track stud twisted off 😫 Seriously doubt they‘d even notice? If they did, 1 point? I‘d be more concerned (but not much more...) about the safety aspect of the seat not being fastened to the car correctly. For looks, you could carefully epoxy the stud and nut you twisted off back in place. I‘m sure, if, in the unlikely event they do look at it, they won‘t look too close? So much for the safety aspect...

11-03-2019	#5
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 879	Re: Seat track stud twisted off 😫 Y’all think a hammer and punch will push it down thru the pan? No grinding required? __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.