Looking for cutaway pic of Corsa Muffler - ZR-1 Net Registry Forums

We Gone · 12-09-2013

Been looking for a cutaway pic of a Corsa Muffler with the duel tips. I interested in how much flow actual goes to the second tip? I know one is a straight thru. All I find are cutaway's of single outlet. Any info. from you guys that have them would be great. I have a set of them on the way with the new black tips.

http://www.corsaperformance.com/view...4117BLK&cfg=38

Thanks.

-=Jeff=- · 12-09-2013

I have some

EDIT:

We Gone · 12-09-2013

Thanks Jeff, I sent a message to Corsa and they replied all 4 tips are open, But one of them is more for the balance of the tone. They also would not release any information on the flow. From your pics this open/flow looks to be questionable.

-=Jeff=- · 12-09-2013

it is open but the photo is the crappy one in the middle..

are they a black chrome tip? and is the exhaust going to you or Marc for install?

We Gone · 12-09-2013

From there site (The black PVD material looks like black chrome)

http://www.pvdcoatings.org/l

http://www.corsaperformance.com/blacktips/

I will install them at home, Right now I have flowmasters with cats. I have to pass Ga. emissions first and one more time next year. Its not to much trouble just to swap them out. The flowmaster set up is welded so its one assembly I will do the same with the Corsa. Just want the extra HP the Corsa and no cats offer.

WARP TEN · 12-10-2013

The closed chamber of the Corsa is a Helmholz resonator that attenuates the resonance at a specific frequency. Our engines generate resonance spikes at about 1,800 and 3,400 rpm with a little also at about 2,400. The stock system uses the same technology. Corsa calls it quarter wave tuning. Essentially, the sound waves go into the closed chamber and based on its size and shape, sound waves of a particular frequency will cancel each other out. I forget which frequency the mufflers deal with, I think the 1,800 one, with the center resonator handling the 3,400 rpm resonance spike. By the time exhaust pressure gets to the muffler, the single pipe is more than enough to flow the gases without much, if any, back pressure. March Haibeck has done a fair amount of testing on exhaust system performance. --Bob

Meanmyz · 12-10-2013

Quote:

Originally Posted by We Gone

I have a set of them on the way with the new black tips.
Thanks.

I also bought the Corsa's with their "Black Diamond" tips. I went through Summit Racing to get them. There weren't any deals out there on these mufflers on the internet, as Corsa built them per order.

When I got the mufflers, I took emery cloth and took special attention and time to scuff the muffler cans and outlets up to the tips. After properly cleaning and degreasing for any oils, I then painted the cans and outlets up to the tips black with Krylon high heat black.

Like you, I think these mufflers will look awesome on our cars.

Meanmyz · 12-10-2013

Well, I'll be! From your link in the first post, I see that Corsa is advertising this setup now. They weren't when I ordered in August/September.

The Corsa rep said that they had made some special order that way in the past, so I wasn't the first one.

Corsa isn't allergic to money, so I am sure they'll go wherever there is a demand.

We Gone · 12-10-2013

Ordered mine thur Summit also I get free shipping as I can pick them up at the showroom its only 10 miles from my house. Great idea on painting the muffs black.

Thanks Steve

Meanmyz · 12-10-2013

Quote:

Originally Posted by We Gone

Great idea on painting the muffs black.

Thanks. That way it keeps the factory theme, but with the upgrade in performance.

12-09-2013	#1
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,162	Looking for cutaway pic of Corsa Muffler Been looking for a cutaway pic of a Corsa Muffler with the duel tips. I interested in how much flow actual goes to the second tip? I know one is a straight thru. All I find are cutaway's of single outlet. Any info. from you guys that have them would be great. I have a set of them on the way with the new black tips. http://www.corsaperformance.com/view...4117BLK&cfg=38 Thanks. Last edited by We Gone; 12-09-2013 at 02:12 PM.

12-09-2013	#2
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,131	Re: Looking for cutaway pic of Corsa Muffler I have some EDIT: __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 Last edited by -=Jeff=-; 12-09-2013 at 02:35 PM.

12-09-2013	#3
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,162	Re: Looking for cutaway pic of Corsa Muffler Thanks Jeff, I sent a message to Corsa and they replied all 4 tips are open, But one of them is more for the balance of the tone. They also would not release any information on the flow. From your pics this open/flow looks to be questionable. Last edited by We Gone; 12-09-2013 at 03:55 PM.

12-09-2013	#4
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,131	Re: Looking for cutaway pic of Corsa Muffler it is open but the photo is the crappy one in the middle.. are they a black chrome tip? and is the exhaust going to you or Marc for install? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - 3" Magnaflow Bullet cats - LT4 Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

12-09-2013	#5
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,162	Re: Looking for cutaway pic of Corsa Muffler From there site (The black PVD material looks like black chrome) http://www.pvdcoatings.org/l http://www.corsaperformance.com/blacktips/ I will install them at home, Right now I have flowmasters with cats. I have to pass Ga. emissions first and one more time next year. Its not to much trouble just to swap them out. The flowmaster set up is welded so its one assembly I will do the same with the Corsa. Just want the extra HP the Corsa and no cats offer. Last edited by We Gone; 12-09-2013 at 07:08 PM.

12-10-2013	#6
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,028	Re: Looking for cutaway pic of Corsa Muffler The closed chamber of the Corsa is a Helmholz resonator that attenuates the resonance at a specific frequency. Our engines generate resonance spikes at about 1,800 and 3,400 rpm with a little also at about 2,400. The stock system uses the same technology. Corsa calls it quarter wave tuning. Essentially, the sound waves go into the closed chamber and based on its size and shape, sound waves of a particular frequency will cancel each other out. I forget which frequency the mufflers deal with, I think the 1,800 one, with the center resonator handling the 3,400 rpm resonance spike. By the time exhaust pressure gets to the muffler, the single pipe is more than enough to flow the gases without much, if any, back pressure. March Haibeck has done a fair amount of testing on exhaust system performance. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

12-10-2013	#8
Meanmyz Join Date: Feb 2006 Location: Springfield, Minnesota Posts: 444	Re: Looking for cutaway pic of Corsa Muffler Well, I'll be! From your link in the first post, I see that Corsa is advertising this setup now. They weren't when I ordered in August/September. The Corsa rep said that they had made some special order that way in the past, so I wasn't the first one. Corsa isn't allergic to money, so I am sure they'll go wherever there is a demand.