F*U* car (just unloaded 9mm on motor). - ZR-1 Net Registry Forums

Schrade · 12-27-2013

Well, sort of, anyway here (and the thought HAS crossed my mind here (but that doesn't take long either ) ) .

Good idea there Cliff - after seein' mgbvr8's handy gizmo-bob in operation...

So I looked to see if a USB scope could be had (lot$ cheaper, but 20 miles away), and then found one local, for a few $$ more):

What car tools have you gotten for Christmas?

Dynomite · 12-27-2013

Yep........The Bore Scope is super and I used it to make sure I did not drop something into the cylinders....and checked the cylinder walls....SUPER

If you want to take a look at what is under the plenum or check your brake pads..........The Wireless Bore Scope is ideal

Wireless Bore Scope

Quote:

Originally Posted by Schrade

Well, sort of, anyway here (and the thought HAS crossed my mind here (but that doesn't take long either ) ) .

Good idea there Cliff - after seein' mgbvr8's handy gizmo-bob in operation...

So I looked to see if a USB scope could be had (lot$ cheaper, but 20 miles away), and then found one local, for a few $$ more):

What car tools have you gotten for Christmas?

GOLDCYLON · 12-28-2013

Pretty slick

tf95ZR1 · 12-29-2013

A true mechanic
Busted knuckles

Z06scentair · 12-29-2013

These are fantastic......broke a valve spring on the z06 couple years back, went down inside the spark plug hole to make sure no piston to valve contact occured.

It did the trick and confirmed no damage, saved me from pulling the head.

GOLDCYLON · 12-29-2013

Cliff where did you pick that up? Are you in CA now?

Paul Workman · 12-29-2013

BOY-YO-BOY, I can see a couple dozen times I could have used one of those! Gonna have to look that one up; check 'em out. (Possibly use as a bore scope too (on bigger firearms, doanchaknow

).

Thanks for the post!

Dynomite · 12-29-2013

Quote:

Originally Posted by GOLDCYLON

Cliff where did you pick that up? Are you in CA now?

Ebay.....very similar to this http://www.ebay.com/itm/Whistler-9mm...item4d16c18e43

Yes.....CA

And I forgot to bring the wireless inspection camera back to CA

Toyvet1 · 01-04-2014

Picked one up at Harbor Freight for $59

cadillac531 · 01-04-2014

Quote:

Originally Posted by Toyvet1

Picked one up at Harbor Freight for $59

Is that this one?

http://www.harborfreight.com/digital...era-67979.html

12-27-2013	#1
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	*FU* car (just unloaded 9mm on motor). Well, sort of, anyway here (and the thought HAS crossed my mind here (but that doesn't take long either ) ) . Good idea there Cliff - after seein' mgbvr8's handy gizmo-bob in operation... So I looked to see if a USB scope could be had (lot$ cheaper, but 20 miles away), and then found one local, for a few $$ more): What car tools have you gotten for Christmas?** __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

12-28-2013	#3
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	*Re: FU* car (just unloaded 9mm on motor).** Pretty slick __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

12-29-2013	#4
tf95ZR1 Join Date: Aug 2005 Location: Northridge, CA Posts: 1,445	*Re: FU* car (just unloaded 9mm on motor).** A true mechanic Busted knuckles

12-29-2013	#5
Z06scentair Join Date: Sep 2013 Location: Charlotte NC Posts: 655	*Re: FU* car (just unloaded 9mm on motor).** These are fantastic......broke a valve spring on the z06 couple years back, went down inside the spark plug hole to make sure no piston to valve contact occured. It did the trick and confirmed no damage, saved me from pulling the head.

12-29-2013	#6
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,153	*Re: FU* car (just unloaded 9mm on motor).** Cliff where did you pick that up? Are you in CA now? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

12-29-2013	#7
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	*Re: FU* car (just unloaded 9mm on motor). BOY-YO-BOY*, I can see a couple dozen times I could have used one of those! Gonna have to look that one up; check 'em out. (Possibly use as a bore scope too (on bigger firearms, doanchaknow). Thanks for the post! __________________ Good carz, good food, good friendz = the best of timez!* 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

01-04-2014	#9
Toyvet1 Join Date: Dec 2007 Location: Bloomingdale, Il Posts: 330	*Re: FU* car (just unloaded 9mm on motor).** Picked one up at Harbor Freight for $59