06-30-2022 | #1 |
Join Date: May 2021
Location: Cleveland, OH
Posts: 43
|
Interior lights stay on
Hello team!
I have this issue in my 90, where when I get in or out, the interior lights stay on for 10-15 minutes (however long the relay timer is). I know it?s not the hatch, because it has no timer, and the lights would stay on indefinitely if it was the hatch. Is there a common place where I can start to look to fix this? Where can I start this diag? |
06-30-2022 | #2 | |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Interior lights stay on
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
06-30-2022 | #3 |
Join Date: Mar 2021
Location: Crawfordville, FL
Posts: 216
|
Re: Interior lights stay on
Sounds normal, takes 10 min or so for the computer to shut off the lights, so what are you trying to fix? Do the lights go out if you turn on or start the car?
I found this thread on the corvetteactioncenter forum, read the first response. There are also numerous threads on the Corvette Forum about the interior light delay. |
07-01-2022 | #4 |
Join Date: Sep 2016
Location: Ocala, FL
Posts: 894
|
Re: Interior lights stay on
Door switch agree. You and and a friend with doors open push them in and lights will go off. What happens is the switches get shorter over the years. I build them up with JB weld and all is well again. Or you can tape nickels to the door jamb for a temp fix. They are available at corvette central for around 35 bucks.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
07-02-2022 | #5 |
Join Date: Jul 2020
Location: Oswego, IL
Posts: 88
|
Re: Interior lights stay on
On your door ajar switch, try pulling this plastic plunger out a bit. If it's pushed in, it won't make contact with the door jam to shut off the lights. I think it will slide out about 3/4" or 1", then shut the door.
|
|
|