ZR-1 Net Registry Forums - View Single Post - What all to remove on the throttle body for powder coat?

Jagdpanzer · 03-26-2020

I strip them all the way down.
There is a nylon bushing under the primary return spring that can’t take the heat. Be sure to Dremel off the spot welds on the end of screws that retain the throttle blades to the shaft so you don’t wipe out the threads.

Sent from my iPhone using ZR-1 Net Registry

03-26-2020	#2
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,644	Re: What all to remove on the throttle body for powder coat? I strip them all the way down. There is a nylon bushing under the primary return spring that can’t take the heat. Be sure to Dremel off the spot welds on the end of screws that retain the throttle blades to the shaft so you don’t wipe out the threads. Sent from my iPhone using ZR-1 Net Registry __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake