Thread: 4:10 gears
View Single Post
Old 06-05-2018   #8
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,036
Default Re: 4:10 gears

Despite Pete's preference for 3.45s for drag racing. I think 4.10s were one of the best mods I did on both of my ZR-1s (along with the Hurst short shifter set up to look stock). One car had about 450 HP and one had closer to 500. Really made around-town street driving better . Face it, 99% of the time you will not be applying full power on every takeoff. If you are drag racing you can lug the engine a bit at the start, although you will need to shift to 4th in the quarter mile. For the three or four times I actually drag raced my cars it was fine with me. Not trying to set any records, just have fun. Depends on your goals for the car and your typical use. Your mileage may vary.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote