ZR-1 Net Registry Forums - View Single Post - Quick questions before clutch reassembly.. Pics

A26B · 10-31-2014

The LT5 bolt is the correct bolt. Make sure the flywheel is counterbored to accept the large o.d. of the bolt shank and should fit very close. Refer to you old dual mass flywheel bolt holes for a reference.

Even the bolt you show as "LT1" is incorrect for the LT1. The correct bolt would not have threads way up into the pressure plate.

10-31-2014	#2
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,373	Re: Quick questions before clutch reassembly.. Pics The LT5 bolt is the correct bolt. Make sure the flywheel is counterbored to accept the large o.d. of the bolt shank and should fit very close. Refer to you old dual mass flywheel bolt holes for a reference. Even the bolt you show as "LT1" is incorrect for the LT1. The correct bolt would not have threads way up into the pressure plate. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.