ZR-1 Net Registry Forums - View Single Post

WVZR-1 · 04-22-2015

I would think that any purchase locally of an appropriate sized Adel clamp would do as well or better than anything removed from an original harness. The original harnesses most of the time had the retainer/strap or whatever taped right into the harness so it was in the correct location for attachment.

Google for "Adel clamp" should get you going.

Nearly all of the Delphi conduit and harness hardware is here:

http://catalog.delphi.com/connectors...,164483,165225

Many classes of hardware retainers.

The very unusual shaped conduit clamps I've not seen in some time. They could very well be included in the Delphi document I linked.

04-22-2015	#6
WVZR-1 Join Date: Oct 2004 Posts: 1,889	Re: looking for harness brackets/clamps I would think that any purchase locally of an appropriate sized Adel clamp would do as well or better than anything removed from an original harness. The original harnesses most of the time had the retainer/strap or whatever taped right into the harness so it was in the correct location for attachment. Google for "Adel clamp" should get you going. Nearly all of the Delphi conduit and harness hardware is here: http://catalog.delphi.com/connectors...,164483,165225 Many classes of hardware retainers. The very unusual shaped conduit clamps I've not seen in some time. They could very well be included in the Delphi document I linked. Last edited by WVZR-1; 04-22-2015 at 06:30 PM.