Re: Heater hose return fitting replacement
Well, team I have resolved the heater hose fitting issue. A 1/2-14 NPT tap finished off the material left stuck on the threads. So that problem is out of the way. One more problem has cropped up now and that is the fitting of the fan shroud to the Dewitts single row. Even the single row is a little beefier than the stock unit. The fan shroud fits inside the driver side against the end tank without too much issue. The passenger side is way off and may need some trimming. Wondering if others had to do this that went Dewitts.
If I do not do this, there is a noticeable gap from what I can see. Wondering if others had to trim the shroud. Pic attached.
|