Thread: 4:10 gears
View Single Post
Old 06-06-2018   #14
Hog
 
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
Default Re: 4:10 gears

Do any of you guys with 3.73 or lower(4.10's, 4.56's) with the stock tire heights ever do any 1-3-5 shifting when just driving her easy?

The last C5 I had some decent seat time is was a 1999 6 speed with the standard 345hp@5600/350lb/ft@4400rpm LS1. It had 3.42:1 gearing and its 2.66:1 1st gear ratio (autos were 2.73 or 3.15-but have the 3.06 1st gear of the 4l60e to aid with spirited acceleration-at least until that massive rpm drop into 2nd is encountered)
with stock tire height 275/40zr18 rears of 26.6" (315/35zr17 is 25.6") and I found city driving unenjoyable.
I always said that if I got into a C5, a rear gear change would be a must, or go for the lower ratioed Tremec M12 2.97:1 1st gear trans and LS6 engine, though you are still stuck with OEM 3.42 rear cogs.

I didn't think that the 97-00 LS1 had the best off idle part throttle grunt, esp. compared to a GEN-2 LT1. Would an intact LT5 be better or worse than an LS1 in the part throttle off idle torque department?
__________________
peace
Paul

ZR-1 Net Registry Member #1494
Hog is offline   Reply With Quote