Quote:
Originally Posted by secondchance
Having played with aftermarket radio/amps for ZR-1s since 1991, I recommend new infotainment head unit, keep Bose amps/speakers by using Metra interface cables.
https://www.amazon.com/Metra-70-1857...rolet+Corvette
I recommend "ground loop isolators for RCA low level outputs to avoid poping when turning on and off and alternator whine.
Going to a 4 ohm system is an option. However, to do this effectively, speaker housings must be redesigned and fabricated and will be next to impossible to generate low frequency compared to Bose designed ported enclosure.
I added a Alpine 500 watt dedicated amp to feed low profile Pioneer 10" subwoofer in a custom enclosure to expand low frequency below Bose system.
https://hosting.photobucket.com/albu...n/IMG_0612.jpg |
I secondchance...i have all the bose system (head unit and speaker) but i insallet 4 little amp in every speaker box (if i remember correctly 25watt), they work good with the original cable, but when i turn on there is a popping as you say and also i hear the alternator whine...and when you run the car is very very noise...how i can erase this noise? Thanks in advance