Re: Hopefully not catastrophic failure?
Quote:
Originally Posted by XfireZ51
Yes, I guess I blocked my episode w this. What a pain! However, even if u block IH, you still need to seal head/IH interface. I use Permatex #2 around that area only.
|
Dittos
After porting, there was about 1/8"-3/16" between the water and the intake runner. I was using a gasket from another vendor, so I switched to the ones available at Jerry's Gaskets, and I too used Permatex #2 around the water port.
Hope this helps.
Paul.
__________________
Good carz, good food, good friendz = the best of timez!
90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs
Former Secretary, ZR-1 Net Registry
|