ZR-1 Net Registry Forums - View Single Post

A26B · 04-17-2011

Rick,
You can save yourself a little trouble by putting the bolts in the proper hole in the new water pump on the bench, as you remove them from the old pump on the engine. Then, after the old pump is off, put it on the bench beside the new one & transfer the bolts over to the old pump & reinstall the new pump accordingly.

Jerry :-)

04-17-2011	#5
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,373	Re: Water pump replacement. Rick, You can save yourself a little trouble by putting the bolts in the proper hole in the new water pump on the bench, as you remove them from the old pump on the engine. Then, after the old pump is off, put it on the bench beside the new one & transfer the bolts over to the old pump & reinstall the new pump accordingly. Jerry :-) __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.