ZR-1 Net Registry Forums - View Single Post

rhipsher · 04-17-2011

This bolt is why.

I could get a 10mm open end wrench on it from the front but could not break it loose. And there's no room to get a socket or ratchet on it unless you do it from the top. You still have to remove the alternator to get a socket on it. That's why. Sure you can remove the air horn and tb but I chose to just move the plenum aside.

04-17-2011	#3
rhipsher Join Date: Aug 2008 Location: Houston 90 Red ZR-1 Posts: 2,320	Re: Water pump replacement. This bolt is why. I could get a 10mm open end wrench on it from the front but could not break it loose. And there's no room to get a socket or ratchet on it unless you do it from the top. You still have to remove the alternator to get a socket on it. That's why. Sure you can remove the air horn and tb but I chose to just move the plenum aside. Last edited by rhipsher; 04-17-2011 at 07:35 PM.