How to fix Code 63, ABS Solenoid Relay failure.
The original Bosch relay was a bad design and has been discontinued for years. I opted to replace the original with a new style unit which is much cheaper and has a lifetime guarantee.
Remove the solenoid relay, it lives on top of the ABS pump which is located underneath the package tray behind the drivers seat.
It looks like this:
Pry off the metal cover with small screwdriver:
Relay exposed:
Use dremmel and cutting wheel to remove the guts:
Drill the back sides of the contact pins being careful not to drill out the rivet that holds the pin to the plastic base.
Solder wires into holes drilled into pins:
Continued.....