Re: Help! 1st Time Removing Plenum....now rough idle
Hi Max,
You may get more response if you bring up an old post with a similar problem to what ever you are facing, or a new post on that issue.
I don't know the code #s but have had ABS faults due to loose wheel hubs, which can happen when you run hard on modern performance tires. Probably worth checking by jacking the car up and shaking each wheel (left/right and up/down), any more than just a little play (both directions) indicates it's time to replace. It usually takes a lot of play before ABS has trouble though.
Hope that helps,
- Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's
DRM chip/Watson/Borla/lid/LW batt&headlights,
springs, shocks, pads & lines, quick rack & Turn One,
camber brace, 32/22mm sways, A/C halfway deleted
17x11 & 12 CCW's, 315 & 335 Hoosier A6s
[/I]
|