ZR-1 Net Registry Forums - View Single Post

RussMcB · 06-21-2016

This doesn't add much to this discussion, but I know 315's on 11" rear sawblades will not work on the front. I ignorantly thought I could run the same size wheels and track tires on all for corners but it didn't work. On the race track I had tire rub in the front (not surprisingly). The rear wheels with stock offset mounted on the front stuck out too far.

I do run the following on the front of my car, and they fit, work well:
- My front street tires are 285's on aftermarket 11" A-molds.
- My front track tires are 315's on 9" A-molds.

06-21-2016	#5
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,160	Re: 12" wheel up front? This doesn't add much to this discussion, but I know 315's on 11" rear sawblades will not work on the front. I ignorantly thought I could run the same size wheels and track tires on all for corners but it didn't work. On the race track I had tire rub in the front (not surprisingly). The rear wheels with stock offset mounted on the front stuck out too far. I do run the following on the front of my car, and they fit, work well: - My front street tires are 285's on aftermarket 11" A-molds. - My front track tires are 315's on 9" A-molds. __________________ Russ McBride, [COLOR="Red"]Car Sold 8/2020[/COLOR] #1635, Marietta, GA USA, 1991 ZR-1, #766 (bought 1/1/2015) MS3-Pro, OBX, SW X-Pipe, Borla, Hurst, SLP, Goodyear F1 GS-D3, Kenwood. HOTB 2016Q3 [IMG]http://zr1.net/forum/picture.php?albumid=316&pictureid=2873[/IMG] [IMG]http://zr1.net/forum/picture.php?albumid=336&pictureid=2985[/IMG]