Thought I would just make a thread here with some pics. Will be sending the plenum and IH out for porting and a re-tune for the chip. Will be removing the secondaries as well as having the coolant plugged for the plenum/TB.
I just went over a few old threads and posts and theres a ton of info on this site so figuring things out should be pretty easy. One thing I wanted to say was I have a noticeable amount of oil in the plenum.. Ill take better pics in the light tomorrow.
pics for my own reference if needed..
Parts starting to pile up
![](http://i1207.photobucket.com/albums/bb463/Emm3Speed/ZR-1%20Plenum%20and%20IH%20pull%20%20porting/A14FF83D-6150-4F68-AFB7-EE67BF512866_zpsmxwy9jif.jpg)
Had to loosen this fuel.. connection? to get to this bolt. I also removed the fuel rail cap and tried to relieve pressure... there was no fuel to come out at all. bad thing?
![](http://i1207.photobucket.com/albums/bb463/Emm3Speed/ZR-1%20Plenum%20and%20IH%20pull%20%20porting/1AFA14DB-DA46-480B-9FCB-02EF96DDFD52_zpspnrsvto4.jpg)
Getting there..
![](http://i1207.photobucket.com/albums/bb463/Emm3Speed/ZR-1%20Plenum%20and%20IH%20pull%20%20porting/02F71DA1-7537-4E70-9A0B-56D1C661C048_zpsp9pdjp48.jpg)
Noticeable amount pooled up at the back. Will be installing catch can(s) before reassembly. Will take some pics in daylight tomorrow.